T7
www.vishay.com
Vishay Sfernice
Revision: 03-Apr-17
2
Document Number: 51015
For technical questions, contact: sferpottrimmers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ELECTRICAL SPECIFICATIONS
Resistive element Cermet
Electrical travel 270° ± 15°
Resistance range 10 to 2.2 M
Standard series E3 1 - 2.2 - 4.7 and on request 1 - 2 - 5
Tolerance standard
standard ± 20 %
on request ± 10 %
Power rating linear
0.5 W at 85 °C
Circuit diagram
Temperature coefficient See Standard Resistance Element Data
Limiting element voltage (linear law) 250 V
Contact resistance variation 3 % or 3
End resistance (typical) 1
Dielectric strength (RMS) 1000 V
Insulation resistance 10
6
M
MECHANICAL SPECIFICATIONS
Mechanical travel 300° ± 5°
Operating torque (max. Ncm) 1.5
End stop torque (max. Ncm) 3
Unit weight (max. g) 0.5
Terminals SnAg alloy (code e2)
ENVIRONMENTAL SPECIFICATIONS
Temperature range -55 °C to +125 °C
Climatic category 55/100/56
Sealing
IP64
For board cleaning, Vishay recommends testing before usage. Water immersion is
forbidden. Ultrasonic may cause component damage or failure.
0
20
40
100 125 140
85
70
0.25
0
0.50
AMBIENT TEMPERATURE IN DEGREES CELSIUS
POWER IN WATT
