DIMENSIONS ARE NOMINAL VALUES IN INCHES UNLESS OTHERWISE
DESIGNATED.
Outer jacket color will be white (designated by a “-9)" appended
to the part number, e.g. 7530A5524-9) unless otherwise
specied.
Designate outer jacket color with a dash number in accordance
with MIL-STD-681. Other codes and sufxes may be added to
the part number, as necessary, to capture any additional
requirements imposed by the purchase order.
Users should evaluate the suitability of this product for their application. Specications are subject to change without notice. Tyco Electronics
Corporation also reserves the right to make changes in materials or processing, which do not affect compliance with any specication,
without notication to Buyer.
Page 1 of 1
Rayfoam, Cheminax, Raychem, TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks.
© 2013 Tyco Electronics Corporation, All rights reserved.
501 Oakside Avenue
Redwood City, California 94063-3800
1-800-227-8816 Fax: 1-650-361-6297
Raychem Wire & Cable
THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS
REFERENCED HEREIN. REFERENCED DOCUMENTS SHALL BE OF THE
ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.
DIELECTRIC
Rayfoam H
Color - White
CONDUCTOR
AWG 30, 7 Strands of
AWG 38, Silver-Coated
High-Strength Copper
Alloy
.0120
SPECIFICATION CONTROL DRAWING
7530A5524
CHEMINAX
75 OHM, AWG 30, 7 STRANDS OF AWG 38, TRIAXIAL CABLE
Date 5-9-13
Revision A
THIS SPECIFICATION SHEET FORMS A PART OF THE LATEST ISSUE OF RAYCHEM SPECIFICATION 1200.
CONSTRUCTION DETAILS ELECTRICAL CHARACTERISTICS
2
nd
SHIELD
AWG 38,
Tin-Coated Copper
2
nd
JACKET
Ink Jet Markable ETFE
Color - White
CHARACTERISTIC IMPEDANCE 75 ± 3 ohms, Method B
CAPACITANCE 17.5 pF/ft. (nominal)
VELOCITY OF PROPAGATION 77% (nominal)
ADDITIONAL REQUIREMENTS
ELECTRICAL
CONDUCTOR RESISTANCE 116. ohms/1000 ft. (nominal)
INSULATION RESISTANCE
(CONDUCTOR TO SHIELD)
10,000 megohms (minimum)
for 1000 ft.
JACKET FLAWS
SPARK TEST
IMPULSE TEST
1.0 kV (rms)
6.0 kV (peak)
VOLTAGE WITHSTAND
CONDUCTOR TO SHIELD
SHIELD TO SHIELD
1000 volts (rms) (minimum)
500 volts (rms) (minimum)
ENVIRONMENTAL
FLAMMABILITY Method B
HEAT SHOCK 225°C
LOW TEMPERATURE-COLD BEND -55°C/3.25 inch mandrel
VOLTAGE WITHSTAND
(Post Environmental)
1000 volts (rms), 1 minute
PHYSICAL
INSULATION (DIELECTRIC)
ELONGATION
TENSILE STRENGTH
50% (minimum)
600 lbf/in
2
(minimum)
JACKET (EACH)
ELONGATION
TENSILE STRENGTH
150% (minimum)
5000 lbf/in
2
(minimum)
JACKET THICKNESS (EACH) .006 inch (minimum)
.008 inch (nominal)
SHIELD COVERAGE (EACH) 90% (minimum)
WEIGHT 13.5 lbs/1000 ft. (nominal)
1
st
JACKET
UXL-ETFE
Color - White
1
st
SHIELD
AWG 38,
Tin-Coated Copper
.053
.070
.086
.103
.119
