OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

OP900SL

P1-P3
PN Silicon Photodiode
OP900SL
© TT electronics plc
Issue A 08/2016 Page 1
OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
www.optekinc.com | www.ttelectronics.com
General Note
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
Description:
Each OP900SL consists of a PN junction silicon photodiode mounted in a miniature glass-lensed hermetically
sealed “pill” package. The lensing effect allows an acceptance half-angle of 18°, when measured from the optical
axis to the half-power point.
The OP900SL is mechanically and spectrally matched to the OP123 series emitters.
Please refer to Application Bulletins 208 and 210 for additional design information and reliability (degradation) data,
and to Application Bulletin 202 for pill-type soldering to PCBoard.
Applications:
• Non-contact reflecve object sensor
• Assembly line automaon
• Machine automaon
• Machine safety
• End of travel sensor
• Door sensor
Features:
• Narrow receiving angle
• Enhanced temperature range
• Ideal for direct mounng to PCBoard
• Fast switching speed
• Linear response vs.irradiance
• Mechanically and spectrally matched to OP123 emiers
Part Number Sensor Viewing Angle
OP900SL Photodiode 35°
Ordering InformaƟon
1
2
Pin # Sensor
1 Collector / Cathode
2 Emitter / Anode
INCHES
[MILLIMETERS]
DIMENSIONS ARE IN:
RoHS
© TT electronics plc
General Note
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
PN Silicon Photodiode
OP900SL
Issue A 08/2016 Page 2
OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
www.optekinc.com | www.ttelectronics.com
Absolute Maximum Ratings (T
A
= 25° C unless otherwise noted)
Reverse Voltage 100 V
Operang Temperature Range -65° C to +150° C
Storage Temperature Range -65° C to +125° C
Lead Soldering Temperature [1/16 inch (1.6 mm) from the case for 5 seconds with soldering
iron]
260° C
(1)
Power Dissipaon 50 mW
(2)
Electrical Specifications
Electrical Characteristics
(T
A
= 25° C unless otherwise noted)
SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS
I
L
Light Current 8 14 - µA
V
R
= 10 V, E
E
= 20 mW/cm
2 (3)(4)
I
D
Dark Current - - 10 nA
V
R
= 10 V, E
E
= 0
(3)
V
(BR)R
Reverse Voltage Breakdown 100 150 - V
I
R
= 100 μA
t
r
Rise Time - 100 -
ns
t
f
Fall Time - 100 -
V
R
= 50 V, I
L
= 8 µA, R
L
= 1 kΩ
(see test circuit)
Notes:
(1) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering.
(2) Derate linearly 0.5 mW/° C above 25° C.
(3) Junction temperature maintained at 25° C.
(4) Light source is an unfiltered tungsten bulb operating at CT = 2870 K or equivalent infrared source..
© TT electronics plc
General Note
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
PN Silicon Photodiode
OP900SL
Issue A 08/2016 Page 3
OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
www.optekinc.com | www.ttelectronics.com
Performance
OP900SL
P1-P3

OP900SL

Mfr. #:
Buy OP900SL
Manufacturer:
Optek / TT Electronics
Description:
Photodiodes PN PHOTODIODE
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet