1.35V DDR3 SDRAM SODIMM
MT16KSF25664HZ – 2GB
MT16KSF51264HZ – 4GB
Features
• DDR3L functionality and operations supported as
defined in the component data sheet
• 204-pin, small outline dual in-line memory module
(SODIMM)
• Fast data transfer rates: PC3-12800, PC3-10600,
PC3-8500, or PC3-6400
• 2GB (256 Meg x 64), 4GB (512 Meg x 64)
• V
DD
= 1.35V (1.283V to 1.45V)
• V
DD
= 1.5V (1.425V to 1.575V)
• Backward compatible to V
DD
= +1.5V ±0.075V
• V
DDSPD
= +3.0V to +3.6V
• Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
• Dual rank
• On-board I
2
C temperature sensor with integrated
serial presence-detect (SPD) EEPROM
• Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Gold edge contacts
• Halogen-free
• Fly-by topology
• Terminated control, command, and address bus
Figure 1: 204-Pin SODIMM (MO-268 R/C F)
Module height: 30.0mm (1.18in)
Options Marking
• Operating temperature
– Commercial (0°C ≤ T
A
≤ +70°C) None
• Package
– 240-pin DIMM (halogen-free) Z
• Frequency/CAS latency
– 1.25ns @ CL = 11 (DDR3-1600) -1G6
– 1.5ns @ CL = 9 (DDR3-1333) -1G4
– 1.87ns @ CL = 7 (DDR3-1066) -1G1
– 1.87ns @ CL = 8 (DDR3-1066)
1
-1G0
– 2.5ns @ CL = 5 (DDR3-800)
1
-80C
– 2.5ns @ CL = 6 (DDR3-800)
1
-80B
Note:
1. Not recommended for new designs.
Table 1: Key Timing Parameters
Speed
Grade
Industry
Nomenclature
Data Rate (MT/s) t
RCD
(ns)
t
RP
(ns)
t
RC
(ns)CL = 11 CL = 10 CL = 9 CL = 8 CL = 7 CL = 6 CL = 5
-1G6 PC3-12800 1600 1333 1333 1066 1066 800 667 13.125 13.125 48.125
-1G4 PC3-10600 – 1333 1333 1066 1066 800 667 13.125 13.125 49.125
-1G1 PC3-8500 – – – 1066 1066 800 667 13.125 13.125 50.625
-1G0 PC3-8500 – – – 1066 – 800 667 15 15 52.5
-80B PC3-6400 – – – – – 800 667 15 15 52.5
2GB, 4GB (x64, DR) 204-Pin 1.35V DDR3 SODIMM
Features
PDF: 09005aef83b11a03
ksf16c256_512x64hz – Rev. D 4/13 EN
1
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2009 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.