OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

TSL13S-LF

P1-P3P4-P6P7-P9P10-P12
TSL12S, TSL13S, TSL14S
LIGHT-TO-VOLTAGE CONVERTERS
TAOS051E − SEPTEMBER 2007
1
The LUMENOLOGY r Company
r
r
Copyright E 2007, TAOS Inc.
www.taosinc.com
D Converts Light Intensity to Output Voltage
D Monolithic Silicon IC Containing
Photodiode, Transconductance Amplifier,
and Feedback Components
D Single-Supply Operation . . . 2.7 V to 5.5 V
D High Irradiance Responsivity ...Typical
246 mV/(μW/cm
2
) at λ
p
= 640 nm (TSL12S)
D Low Supply Current . . . 1.1 mA Typical
D Sidelooker 3-Lead Plastic Package
D RoHS Compliant (−LF Package Only)
Description
The TSL12S, TSL13S, and TSL14S are cost-optimized, highly integrated light-to-voltage optical sensors, each
combining a photodiode and a transimpedance amplifier (feedback resistor = 80 MΩ, 20 MΩ, and 5 MΩ,
respectively) on a single monolithic integrated circuit. The photodiode active area is 0.5 mm × 0.5 mm and the
sensors respond to light in the range of 320 nm to 1050 nm. Output voltage is linear with light intensity
(irradiance) incident on the sensor over a wide dynamic range. These devices are supplied in a 3-lead clear
plastic sidelooker package (S). When supplied in the lead (Pb) free package, the device is RoHS compliant.
Functional Block Diagram
Voltage
Output
+
−
r
r
Texas Advanced Optoelectronic Solutions Inc.
1001 Klein Road S Suite 300 S Plano, TX 75074 S (972) 673-0759
PACKAGE S
SIDELOOKER
(FRONT VIEW)
1
GND
2
V
DD
3
OUT
PACKAGE SM
SURFACE MOUNT
SIDELOOKER
(FRONT VIEW)
1
GND
2
V
DD
3
OUT
TSL12S, TSL13S, TSL14S
LIGHT-TO-VOLTAGE CONVERTERS
TAOS051E − SEPTEMBER 2007
2
r
r
Copyright E 2007, TAOS Inc.
The LUMENOLOGY r Company
www.taosinc.com
Available Options
DEVICE T
A
PACKAGE − LEADS PACKAGE DESIGNATOR ORDERING NUMBER
TSL12S 0°C to 70°C 3-lead Sidelooker S TSL12S
TSL12S 0°C to 70°C 3-lead Sidelooker — Lead (Pb) Free S TSL12S−LF
TSL12S 0°C to 70°C 3-lead Surface-Mount Sidelooker — Lead (Pb) Free SM TSL12SM−LF
TSL13S 0°C to 70°C 3-lead Sidelooker S TSL13S
TSL13S 0°C to 70°C 3-lead Sidelooker — Lead (Pb) Free S TSL13S−LF
TSL13S 0°C to 70°C 3-lead Surface-Mount Sidelooker — Lead (Pb) Free SM TSL13SM−LF
TSL14S 0°C to 70°C 3-lead Sidelooker S TSL14S
TSL14S 0°C to 70°C 3-lead Sidelooker — Lead (Pb) Free S TSL14S−LF
TSL14S 0°C to 70°C 3-lead Surface-Mount Sidelooker — Lead (Pb) Free SM TSL14SM−LF
Terminal Functions
TERMINAL
TYPE
DESCRIPTION
NAME
NO.
TYPE DESCRIPTION
GND 1 Power supply ground (substrate). All voltages are referenced to GND.
OUT 3 O Output voltage.
V
DD
2 Supply voltage.
Absolute Maximum Ratings over operating free-air temperature range (unless otherwise noted)
†
Supply voltage, V
DD
(see Note 1) 6 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output current, I
O
±10 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Duration of short-circuit current at (or below) 25°C (see Note 2) 5 s. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating free-air temperature range, T
A
−25°C to 85°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature range, T
stg
−25°C to 85°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds (S Package) 260°C. . . . . . . . . . . . . . . . . . . .
Reflow solder, in accordance with J-STD-020C or J-STD-020D (SM Package) 260°C. . . . . . . . . . . . . . . . . . .
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltages are with respect to GND.
2. Output may be shorted to supply.
Recommended Operating Conditions
MIN NOM MAX UNIT
Supply voltage, V
DD
2.7 5.5 V
Operating free-air temperature, T
A
0 70 °C
TSL12S, TSL13S, TSL14S
LIGHT-TO-VOLTAGE CONVERTERS
TAOS051E − SEPTEMBER 2007
3
The LUMENOLOGY r Company
r
r
Copyright E 2007, TAOS Inc.
www.taosinc.com
Electrical Characteristics at V
DD
= 5 V, T
A
= 25°C, λ
p
= 640 nm, R
L
= 10 kΩ (unless otherwise noted)
(see Notes 3, 4, 5)
PARAMETER
TEST CONDITIONS
TSL12S TSL13S TSL14S
UNIT
PARAMETER TEST CONDITIONS
MIN TYP MAX MIN TYP MAX MIN TYP MAX
UNIT
V
OM
Maximum output voltage 4.6 4.9 4.6 4.9 4.6 4.9 V
E
e
= 8 μW/cm
2
1.5 2 2.5
E
e
= 31 μW/cm
2
1.5 2 2.5
V
Output voltage
E
e
= 120 μW/cm
2
1.5 2 2.5
V
V
O
Output voltage
E
e
= 16 μW/cm
2
4
V
E
e
= 62 μW/cm
2
4
E
e
= 240 μW/cm
2
4
R
e
Irradiance responsivity Note 6 248 64 16
mV/
(μW/
cm
2
)
V
OS
Extrapolated offset
voltage
Note 6 −0.02 0.03 0.08 −0.02 0.03 0.08 −0.02 0.03 0.08 V
V
d
Dark voltage E
e
= 0 0 0.08 0 0.08 0 0.08 V
E
e
= 8 μW/cm
2
1.1 1.7
I
D
Supply current
E
e
= 31 μW/cm
2
1.1 1.7
mA
I
D
Supply current
E
e
= 120 μW/cm
2
1.1 1.7
mA
NOTES: 3. Measurements are made with R
L
= 10 kΩ between output and ground.
4. Optical measurements are made using small-angle incident radiation from an LED optical source.
5. The 640 nm input irradiance E
e
is supplied by an AlInGaP LED with peak wavelength λ
p
= 640 nm.
6. Irradiance responsivity is characterized over the range V
O
= 0.2 to 4 V. The best-fit straight line of Output Voltage V
O
versus
irradiance E
e
over this range may have a positive or negative extrapolated V
O
value for E
e
= 0. For low irradiance values, the output
voltage V
O
versus irradiance E
e
characteristic is non linear with a deviation toward V
O
= 0, E
e
= 0 origin from the best-fit straight
line referenced above.
Dynamic Characteristics at V
DD
= 5 V, T
A
= 25°C, λ
p
= 640 nm, R
L
= 10 kΩ (unless otherwise noted)
(see Figure 1)
PARAMETER
TSL12S TSL13S TSL14S
UNIT
PARAMETER TEST CONDITIONS
MIN TYP MAX MIN TYP MAX MIN TYP MAX
UNIT
t
Output pulse delay
time for rising edge
Min V
O
= 0 V; Peak V
O
= 2 V 13 1.7 0.9
s
t
dr
time for rising edge
(0% to 10%)
Min V
O
= 0.5 V; Peak V
O
= 2 V 2.3 1.2 0.6
μs
t
Output pulse rise time
Min V
O
= 0 V; Peak V
O
= 2 V 20 7.2 2.6
s
t
r
Output pulse rise time
(10% to 90%)
Min V
O
= 0.5 V; Peak V
O
= 2 V 10 6.5 2.9
μs
t
Output pulse delay
time for falling edge
Min V
O
= 0 V; Peak V
O
= 2 V 2.3 1.2 0.8
s
t
df
time for falling edge
(100% to 90%)
Min V
O
= 0.5 V; Peak V
O
= 2 V 2.2 1.1 0.7
μs
t
Output pulse fall time
Min V
O
= 0 V; Peak V
O
= 2 V 10 6.8 2.9
s
t
f
Output pulse fall time
(90% to 10%)
Min V
O
= 0.5 V; Peak V
O
= 2 V 9 6.4 2.8
μs
P1-P3P4-P6P7-P9P10-P12

TSL13S-LF

Mfr. #:
Buy TSL13S-LF
Manufacturer:
ams
Description:
Light To Frequency & Light To Voltage Light to Voltage Converter
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet