Type Package
TLE 4269 G PG-DSO-8
TLE 4269 GM PG-DSO-14
TLE 4269 GL PG-DSO-20
5-V Low Drop Fixed Voltage Regulator
TLE 4269
^
P-DSO-8-3, -6, -7, -8, -9
P-DSO-14-3, -8, -9, -11, 14
P/PG-DSO-20-1,-6,-7,-9,-14,-
Data Sheet 1 Rev. 2.5, 2013-11-25
Features
Output voltage tolerance ±2%
150 mA current capability
Very low current consumption
Early warning
Reset output low down to
V
Q
= 1 V
Overtemperature protection
Reverse polarity proof
Adjustable reset threshold
Very low drop voltage
Wide temperature range
Integrated pull-up resistor at logic outputs
Green Product (RoHS compliant)
AEC Qualified
Functional Description
This device an automotive suited voltage regulator with a
fixed 5-V output. The maximum operating voltage is
45 V. The output is able to drive 150 mA load. It is short
circuit protected and the thermal shutdown switches the
output off if the junction temperature is in excess of
150 °C. A reset signal is generated for an output voltage
of
V
Q
< 4.65 V. The reset threshold voltage can be
decreased by external connection of a voltage divider.
The reset delay time can be set by an external capacitor.
Reset and sense output have integrated pull-up
resistors. If the integrated resistors are not desired TLE 4279 can be used. It is also
possible to supervise the input voltage by using an integrated comparator to give a low
voltage warning.
Data Sheet 2 Rev. 2.5, 2013-11-25
TLE 4269
Figure 1 Pin Configuration (top view)
Table 1 Pin Definitions and Functions (TLE 4269 G)
Pin No. Symbol Function
1I Input; block to GND directly at the IC with a ceramic capacitor.
2SISense Input; if not needed connect to Q.
3RADJReset Threshold Adjust; if not needed connect to GND.
4D Reset Delay; to select delay time, connect to GND via capacitor.
5GNDGround
6ROReset Output; the open-collector output is internally linked to Q
via a 20 kΩ pull-up resistor. Keep open, if not needed.
7SOSense Output; the open-collector output is internally linked to
the output via a 20 kΩ pull-up resistor. Keep open, if not needed.
8Q5-V Output; connect to GND with a 10 μF capacitor,
ESR < 10 Ω.
GND
RO
SO
D5
6
7
RADJ
8
4
3
2
1
AEP01668
Q
ΙS
Ι
PG-DSO-8
TLE 4269
Data Sheet 3 Rev. 2.5, 2013-11-25
Figure 2 Pin Configuration (top view)
Table 2 Pin Definitions and Functions (TLE 4269 GM)
Pin No. Symbol Function
1RADJReset Threshold Adjust; if not needed connect to GND.
2DReset Delay; to select delay time; connect to GND via capacitor.
3, 4, 5, 6 GND Ground
7ROReset Output; open-collector output, internally connected to Q
via a pull-up resistor of 20 kΩ. Keep open, if not needed.
8SOSense Output; open-collector output, internally connected to Q
via a 20 kΩ pull-up resistor. Keep open, if not needed.
9Q5-V Output; connect to GND with a 10 μF capacitor,
ESR < 10 Ω.
10, 11, 12 GND Ground
13 I Input; block to GND directly at the IC with a ceramic capacitor.
14 SI Sense Input; if not needed connect to Q.
AEP02248
Q
GND
SI
GND
RO
GND
Ι
10
9
GND GND
1
2
3
4
5
GND
6
7SO
14
13
12
11
D
GND
8
RADJ
PG-DSO-14

TLE4269GMXUMA2

Mfr. #:
Manufacturer:
Infineon Technologies
Description:
IC REG LINEAR 5V 150MA 14DSOP
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union