MF-RHT1300-AP Datasheet MF-RHT550-2, MF-RHT750-AP, MF-RHT300-AP | P1-P3

Features

n Compliant with AEC-Q200 Rev-C- Stress

Test Qualiﬁcation for Passive Components

in Automotive Applications

n Operating temperature range up to 125 °C

n Low thermal derating factor

n Higher hold currents at elevated

temperature

n Choice of operating currents

n RoHS compliant* and halogen free**

n Resettable fault protection of general

electronic equipment

MF-RHT Series - PTC Resettable Fuses

* RoHS Directive 2002/95/EC Jan. 27, 2003 including

annex and RoHS Recast 2011/65/EU June 8, 2011.

** Bourns considers a product to be

“halogen free” if (a) the Bromine (Br) content is 900

ppm or less; (b) the Chlorine (Cl) content is 900 ppm

or less; and (c) the total Bromine (Br) and Chlorine (Cl)

content is 1500 ppm or less.

Speciﬁcations are subject to change without notice.

The device characteristics and parameters in this data

sheet can and do vary in different applications

and actual device performance may vary over time.

Users should verify actual device performance in their

speciﬁc applications.

Electrical Characteristics

Model

V max.

Volts

I max.

Amps

hold

trip

Resistance

Max. Time

To Trip

Tripped

Power

Dissipation

Amperes

at 23 °C

Ohms

at 23 °C

Amperes

at 23 °C

Seconds

at 23 °C

Watts

at 23 °C

Hold Trip R

Min.

1Max.

(Post Trip)

Max. Typ.

MF-RHT050 30 40 0.5 0.92 0.48 1.10 2.5 2.5 0.9

MF-RHT070 16 40 0.7 1.4 0.3 0.8 3.5 4.0 1.4

MF-RHT200 16 100 2.0 3.8 0.045 0.110 12.5 3.0 1.4

MF-RHT450 16 100 4.5 7.8 0.022 0.054 22.5 3.0 3.6

MF-RHT650 16 100 6.5 12.0 0.011 0.026 32.5 5.5 4.3

MF-RHT750 16 100 7.5 13.1 0.0094 0.022 37.5 7.0 4.5

MF-RHT1300 16 100 13.0 24.0 0.0041 0.010 60.0 13.0 6.9

Environmental Characteristics

Operating Temperature ......................................... -40 °C to +125 °C

Storage Temperature ............................................ -40 °C to +85 °C

Passive Aging ....................................................... +85 °C, 1000 hours ............................................... ±15 % typical resistance change

Humidity Aging...................................................... +85 °C, 85 % R.H. 1000 hours ............................. ±15 % typical resistance change

Thermal Shock ..................................................... MIL-STD-202, Method 107, .................................. ±10 % typical resistance change

+125 °C to -40 °C,10 cycles

Vibration ............................................................... MIL-STD-883C, Method 2007.1, Condition A ....... No change

Test Procedures And Requirements For Model MF-RHT Series

Test Test Conditions Accept/Reject Criteria

Visual/Mech. ......................................................... Verify dimensions and materials ........................... Per MF physical description

Resistance ............................................................ In still air @ 23 °C ................................................. Rmin ≤ R ≤ R1max

Time to Trip ........................................................... At specied current, Vmax, 23 °C ......................... T ≤ max. time to trip (seconds)

Hold Current ......................................................... 30 min. at Ihold ..................................................... No trip

Trip Cycle Life ....................................................... Vmax, Imax, 100 cycles ........................................ No arcing or burning

Trip Endurance ..................................................... Vmax, 48 hours ..................................................... No arcing or burning

Solderability .......................................................... MIL-STD-202, Method 208 ................................... 95 % min. coverage

Thermal Derating Chart - I

hold

(Amps)

Model

Ambient Operating Temperature

-40 °C -20 °C 0 °C 23 °C 40 °C 50 °C 60 °C 70 °C 85 °C 125 °C

MF-RHT050 0.68 0.62 0.56 0.5 0.44 0.4 0.36 0.34 0.28 0.12

MF-RHT070 0.95 0.87 0.79 0.7 0.62 0.56 0.51 0.47 0.39 0.17

MF-RHT200 2.71 2.49 2.26 2.00 1.77 1.60 1.46 1.34 1.11 0.49

MF-RHT450 6.1 5.6 5.1 4.5 4.0 3.6 3.3 3.0 2.5 1.1

MF-RHT650 8.8 8.1 7.4 6.5 5.7 5.3 4.8 4.3 3.6 1.6

MF-RHT750 10.2 9.4 8.6 7.5 6.6 6.1 5.6 5.0 4.1 1.9

MF-RHT1300 17.7 16.3 14.8 13.0 11.4 10.5 9.6 8.6 7.2 3.3

*RoHS COMPLIANT

& AEC APPROVED

*RoHS COMPLIANT

AEC APPROVED (Select Models)

LEAD FREE

*RoHS COMPLIANT

VERSIONS

AVAILABLE

LEAD FREE

VERSIONS ARE

RoHS COMPLIANT*

RH750

4180S

How to Order

MF - RHT 750 - __ - 14

Multifuse

Product Designator

Series

RHT = High Temperature Radial Leaded Component

Hold Current, Ihold

050 - 1300 (0.70 - 13.00 Amps)

Packaging Options

- = Bulk Packaging

- 2 = Tape and Reel*

- AP = Ammo-Pak*

Part Number Sufx Option

- 14 = Kinked Leads in Place of Standard Straight Leads

- 17 = Straight Leads in Place of Standard Kinked Leads

*Packaged per EIA 486-B

Speciﬁcations are subject to change without notice.

The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.

Users should verify actual device performance in their speciﬁc applications.

MF-RHT Series - PTC Resettable Fuses

Product Dimensions

DIMENSIONS:

(INCHES)

Model

A B C D E F Physical Characteristics

Max. Max. Nom. Tol. ± Min. Max. Nom. Style Material

MF-RHT050

7.40

(0.291)

12.7

(0.500)

5.1

(0.201)

0.7

(0.028)

7.6

(0.30)

3.0

(0.12)

0.51

(0.020)

3 Sn/CuFe

MF-RHT070

6.86

(0.27)

10.8

(0.425)

5.1

(0.201)

0.7

(0.028)

7.6

(0.30)

3.0

(0.12)

0.51

(0.020)

1 Sn/CuFe

MF-RHT200

9.4

(0.37)

14.0

(0.55)

5.1

(0.201)

0.7

(0.028)

7.6

(0.30)

3.0

(0.12)

0.51

(0.020)

3 Sn/Cu

MF-RHT450

10.4

(0.41)

15.6

(0.61)

5.1

(0.201)

0.7

(0.028)

7.6

(0.30)

3.0

(0.12)

0.81

(0.032)

2 Sn/Cu

MF-RHT650

12.7

(0.50)

22.2

(0.88)

5.1

(0.201)

0.7

(0.028)

7.6

(0.30)

3.0

(0.12)

0.81

(0.032)

2 Sn/Cu

MF-RHT750

14.0

(0.55)

23.5

(0.93)

5.1

(0.201)

0.7

(0.028)

7.6

(0.30)

3.0

(0.12)

0.81

(0.032)

2 Sn/Cu

MF-RHT1300

23.5

(0.925)

28.7

(1.17)

10.2

(0.402)

0.7

(0.028)

7.6

(0.30)

3.6

(0.14)

1.0

(0.040)

2 Sn/Cu

Packaging:

BULK: 500 pcs. per bag

TAPE & REEL: MF-RHT050 ~ MF-RHT200 = 3000 pcs. per reel; MF-RHT450 ~ MF-RHT650 = 1500 pcs. per reel;

MF-RHT750 ~ MF-RHT1300 = 1000 pcs. per reel

AMMO-PACK: MF-RHT050 ~ MF-RHT200 = 2000 pcs. per pack; MF-RHT450 ~ MF-RHT750 = 1000 pcs. per pack;

MF-RHT1300 = 500 pcs. per pack

MF-RHT SERIES, REV. J, 09/16

Typical Time to Trip at 23 ˚C

Typical Part Marking

Represents total content. Layout may vary.

0.51 (24AWG)

0.81 (20AWG)

1.0 (18AWG)

Applications

n Protection of automotive circuitry including engine control modules

n Overcurrent surge protection of electronic equipment required to operate at high operating temperature ranges

n Resettable fault protection of general electronic equipment

Style 2

Style 1

F F

Style 

RH750

4180S

MANUFACTURER'S

TRADEMARK

PART

IDENTIFICATION

COUNTRY OF

MANUFACTURE

(S = CHINA)

DATE CODE

(FIRST DIGIT =

LAST DIGIT OF YEAR;

NEXT THREE DIGITS =

DAY OF YEAR)

EXAMPLE: 4180 = 2004 DAY 180

0.01

0.1

100

110 100

Fault Current (Amps)

Time to Trip (Seconds)

MF-RHT070 MF-RHT200 MF-RHT450 MF-RHT1300

MF-RHT650

MF-RHT750

The Time to Trip curves represent

typical performance of a device in

a simulated application environment.

Actual performance in specic

customer applications may differ

from these values due to the

inuence of other variables.

Also available

with kinked

and straight

leads in place

of standard

leads (see

How to Order).

IEC EIA Dimensions

Dimension Description Mark Mark Dimensions Tolerance

Carrier tape width W W

18 -0.5/+1.0

(.709) (-0.02/+.039)

Hold down tape width W

min.

(.433)

Hold down tape No protrusion

Top distance between tape edges W

max.

(.118)

Sprocket hole position W

9 -0.5/+0.75

(.354) (-0.02/+0.03)

Sprocket hole diameter D

4 ±0.2

(.157) (±.0078)

Abscissa to plane (straight lead) H H

18.5 ±3.0

(.728) (±.118)

Abscissa to plane (kinked lead) H

16 ±0.5

(.63) (±.02)

Abscissa to top: MF-RHT050 ~ MF-RHT450 H

32.2

max.

(1.268)

Abscissa to top: MF-RHT650 ~ MF-RHT1300 H

45.0

max.

(1.837)

Overall width w/lead protrusion: MF-RHT050 ~ MF-RHT450 C

42.5

max.

(1.673)

Overall width w/lead protrusion: MF-RHT650 ~ MF-RHT1300 C

55.0

max.

(2.165)

Overall width w/o lead protrusion: MF-RHT050 ~ MF-RHT450 C

42.5

max.

(1.673)

Overall width w/o lead protrusion: MF-RHT650 ~ MF-RHT1300 C

54.0

max.

(2.126)

Lead protrusion I

1.0

max.

(.039)

Protrusion of cutout L L

max.

(.433)

Protrusion beyond hold-down tape I

 Notspecied

Sprocket hole pitch P

12.7 ±0.3

(0.5) (±.012)

Pitch tolerance 20 consecutive

±1

(±.039)

Device pitch: MF-RHT070 ~ MF-RHT450

12.7 ±0.3

(0.5) (±.012)

Device pitch: MF-RHT050 and MF-RHT650 ~ MF-RHT1300

25.4 ±0.6

(1.0) (±.024)

Tape thickness t t

0.9

max.

(.035)

Tape thickness with splice: MF-RHT050 ~ MF-RHT200 t

1.5

max.

(.059)

Tape thickness with splice: MF-RHT450 ~ MF-RHT1300 t

2.3

max.

(.091)

Splice sprocket hole alignment

4.0 ±0.2

(.157) (±.008)

Body lateral deviation Δ

±1

(±.039)

Body tape plane deviation Δ

±0.3

(±.012)

Ordinate to adjacent component lead P

3.81 ±0.07

(.015) (±.028)

MF-RHT Series Tape and Reel Speciﬁcations

Speciﬁcations are subject to change without notice.

The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.

Users should verify actual device performance in their speciﬁc applications.

Devices taped using EIA468–B/IEC60286-2 standards. See table below and Figures 1 and 2 for details.

DIMENSIONS:

(INCHES)

DIMENSIONS:

(INCHES)

P1-P3 P4-P4

MF-RHT1300-AP

Mfr. #:

Buy MF-RHT1300-AP

Manufacturer:

Bourns

Description:

Resettable Fuses - PPTC 13A 16V .0041ohms AEC-Q200 +125C

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

MF-RHT1300-AP

MF-RHT1300-AP

Products related to this Datasheet