https://www.phoenixcontact.com/pi/products/1424133
08/18/2018Page2/4
Flush-type connector-SACC-DSI-M12FSS-4CON-M16/0,5PE-1424133
Technical data
General
Rated voltage 630 V
Rated surge voltage 6 kV
Number of positions 4
Insulation resistance ≥ 100 MΩ
Coding S power
Standards/regulations M12 connector IEC61076-2-111 In line with
Signal type/category Power
Status display No
Overvoltage category III
Degree of pollution 3
Test voltage 6 kV
Connection method Individual wires
Insertion/withdrawal cycles > 100
Torque 3 Nm ... 4 Nm (M12 connector)
Mounting type Rear mounting M16 x 1.5 With flat nut
Material
Flammability rating according to UL 94 V0
Contact material CuZn
Contact surface material Au
Contact carrier material PA
Material, knurls CuZn alloy, nickel-plated
Sealing material FKM
Additional material specifications PU 2K (Grout material)
Cable
Cable type UL/cUL stranded hook-up wire
Conductor cross section 1.31 mm²
AWG signal line 16
Core diameter including insulation 2.2 mm
Wire colors Black 1, black 2, black 3, green/yellow
Conductor material Bare Cu litz wires
Standards/specifications M12 connector IEC61076-2-111 In line with
Flame resistance in acc. to UL 1581 VW1
Halogen-free yes
Ambient temperature (operation) -40 °C ... 105 °C (cable, fixed installation)
-20 °C ... 105 °C (cable, flexible installation)
Standards and Regulations
Standard designation M12 connector
Standards/regulations IEC61076-2-111
Flame resistance in acc. to UL 1581 VW1