1411503

https://www.phoenixcontact.com/us/products/1411503

08/03/2016Page1/7

Network cable-NBC-MSD/ 1,0-93K SCO-1411503

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's

documentation. Our General Terms of Use for Downloads are valid

(http://phoenixcontact.com/download)

Network cable, Sercos III CAT5 (100 Mbps), 4-position, PVC/PVC, signal red RAL 3020, shielded, Plug straight

M12 SPEEDCON / IP67, Coding: D, on free cable end, Cable length: 1 m

Key Commercial Data

Ambient conditions

Degree of protection IP65 (M12 connector)

IP67 (M12 connector)

General data

Rated current at 40°C 4 A

Rated voltage 250 V

Number of positions 4

Signal type/category Sercos III CAT5 (IEC 11801), 100 Mbps

Standards/regulations M12 connector IEC61076-2-101

Characteristics head 1

https://www.phoenixcontact.com/us/products/1411503

08/03/2016Page2/7

Network cable-NBC-MSD/ 1,0-93K SCO-1411503

Color black

Material (component) CuSn (Contact)

Ni/Au (Contact surface)

PA (Contact carriers)

TPU, hardly inflammable, self-extinguishing (Grip)

Zinc die-cast, nickel-plated (Screw connection)

Insulation resistance ≥ 100 MΩ

Insertion/withdrawal cycles ≥ 100

Torque 0.4 Nm

Ambient temperature (operation) -25 °C ... 90 °C

Cable

Cable type Sercos III

Cable type (abbreviation) 93K

UL AWM style 21694 (60°C / 600 V)

Signal type/category Sercos III CAT5 (IEC 11801), 100 Mbps

Cable structure 1x4xAWG22/7; SF/TQ

Conductor cross section 4x 0.34 mm²

AWG signal line 22

Conductor structure signal line 7x 0.25 mm

Core diameter including insulation approx. 1.55 mm

External cable diameter D 6.5 mm ±0.2 mm

Minimum bending radius, fixed installation 3 x D

Minimum bending radius, flexible installation 7 x D

https://www.phoenixcontact.com/us/products/1411503

08/03/2016Page3/7

Network cable-NBC-MSD/ 1,0-93K SCO-1411503

Outer sheath, material PVC

Material, inner sheath PVC

Material conductor insulation PE

Conductor material Tin-plated Cu litz wires

Insulation resistance ≥ 0.5 GΩ*km

Conductor resistance ≤ 120 Ω/km

Wave impedance 100 Ω ±15 Ω (at 100 MHz)

Signal runtime 5.3 ns/m

Coupling resistance ≤ 20.00 mΩ/m (at 10 Hz)

Test voltage Core/Core 2000 V (50 Hz, 1 min.)

Test voltage Core/Shield 2000 V (50 Hz, 1 min.)

Flame resistance According to UL 1685 (CSA FT 4)

Resistance to oil Resistant to oil to a limited extent

Other resistance UV resistant According to UL 1581, Section 1200

Ambient temperature (operation) -40 °C ... 70 °C (cable, fixed installation)

-40 °C ... 70 °C (cable, flexible installation)