https://www.phoenixcontact.com/pi/products/2987927
05/03/2017Page2/4
Single relay-REL-MR- 24DC/21HC AU/MS-2987927
Technical data
Coil side
Typical response time 9 ms
Typical release time 6 ms
Power dissipation for nominal condition 0.41 W
Contact side
Contact type 1 PDT
Type of switch contact Single contact
Contact material AgNi, hard gold-plated
Maximum switching voltage 30 V AC
36 V DC
Minimum switching voltage 12 V (At 1 mA)
Min. switching current 1 mA (at 12 V)
Maximum inrush current 50 mA
Limiting continuous current 50 mA
Switching capacity in acc. with DIN VDE 0660/IEC 60947 3 A (at 240 V, AC15)
Contact side (with destroyed gold layer)
Contact material AgNi
Note the following values are applicable if a gold layer is destroyed
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 6 V AC/DC
Limiting continuous current 16 A
Maximum inrush current 30 A (300 ms)
Min. switching current 100 mA
Interrupting rating (ohmic load) max. 4000 VA (for 250 V AC)
Switching capacity in acc. with DIN VDE 0660/IEC 60947 2 A (at 24 V, DC13)
3 A (at 24 V, AC15)
3 A (at 120 V, AC15)
3 A (at 240 V, AC15)
General
Test voltage relay winding/relay contact 5 kV AC (50 Hz, 1 min.)
Mechanical service life
5 x 10
6
cycles
Standards and Regulations
Connection in acc. with standard CUL
Standards/regulations EN 61810-1
VDE 0435-201
EN 50178
Environmental Product Compliance
China RoHS Environmentally Friendly Use Period = 50
