RT7275/76
®
DS7275/76-04 April 2017 www.richtek.com
1
©
Copyright 2017 Richtek Technology Corporation. All rights reserved. is a registered trademark of Richtek Technology Corporation.
Design
Tools
Sample &
Buy
3A, 18V, 700kHz ACOT
TM
Synchronous Step-Down Converter
Simplified Application Circuit
General Description
The RT7275/76 are high-performance 700kHz 3A step-
down regulators with internal power switches and
synchronous rectifiers. They feature quick transient
response using their Advanced Constant On-Time
(ACOT
TM
) control architecture that provides stable
operation with small ceramic output capacitors and without
complicated external compensation, among other benefits.
The input voltage range is from 4.5V to 18V and the output
is adjustable from 0.765V to 8V.
The proprietary ACOT
TM
control improves upon other fast-
response constant on-time architectures, achieving nearly
constant switching frequency over line, load, and output
voltage ranges. Since there is no internal clock, response
to transients is nearly instantaneous and inductor current
can ramp quickly to maintain output regulation without
large bulk output capacitance. The RT7275/76 are stable
with and optimized for ceramic output capacitors.
With internal 90mΩ switches and 60mΩ synchronous
rectifiers, the RT7275/76 display excellent efficiency and
good behavior across a range of applications, especially
for low output voltages and low duty cycles. Cycle-by-
cycle current limit, input under-voltage lock-out,
externally-adjustable soft-start, output under- and over-
voltage protection, and thermal shutdown provide safe and
smooth operation in all operating conditions.
The RT7275 and RT7276 are each available in WDFN-10L
3x3 and PTSSOP-14 packages, with exposed thermal
pads.
RT7275/76
PVCC
VIN
V
IN
SS
V
OUT
EN
Input Signal
PGOOD
Power Good
BOOT
SW
FB
VOUT
VINR
PGND GND
Features
Fast Transient Response
Steady 700kHz Switching Frequency
At all Load Currents (RT7275)
Discontinuous Operating Mode at Light Load
(RT7276)
3A Output Current
Advanced Constant On-Time (ACOT
TM
) Control
Optimized for Ceramic Output Capacitors
4.5V to 18V Input Voltage Range
Internal 90m
ΩΩ
ΩΩ
Ω Switch and 60m
ΩΩ
ΩΩ
Ω Synchronous
Rectifier
0.765V to 8V Adjustable Output Voltage
Externally-Adjustable, Pre-Biased Compatible Soft-
Start
Cycle-by-Cycle Current Limit
Optional Output Discharge Function (PTSSOP-14
Only)
Output Over- and Under-Voltage Shut-Down
Applications
Industrial and Commercial Low Power Systems
Computer Peripherals
LCD Monitors and TVs
Green Electronics/Appliances
Point of Load Regulation for High-Performance DSPs,
FPGAs, and ASICs
Not Recommended for Sink/Source Applications
Fast-Transient Response
V
IN
= 12V, V
OUT
= 1.05V, I
OUT
= 0 to 3A
Time (100μs/Div)
I
OUT
(2A/Div)
V
OUT
(20mV/Div)
RT7275
RT7275/76
2
DS7275/76-04 April 2017www.richtek.com
©
Copyright 2017 Richtek Technology Corporation. All rights reserved. is a registered trademark of Richtek Technology Corporation.
Marking Information
Ordering Information
Note :
Richtek products are :
RoHS compliant and compatible with the current require-
ments of IPC/JEDEC J-STD-020.
Suitable for use in SnPb or Pb-free soldering processes.
Pin Configuration
(TOP VIEW)
TSSOP-14 (Exposed Pad)
WDFN-10L 3x3
FB
VIN
PGND
GND
SS
PVCC
PGOOD
EN
PGND
SW
SW
BOOT
VOUT
VINR
4
2
3
5
7
6
11
13
12
10
8
9
14
PGND
15
EN
FB
PGOOD
SS
VIN
VIN
BOOT
SW
SW
PVCC
9
8
7
9
1
2
3
4
5
10
PGND
11
RT7276
GCPYMDNN
RT7276GCP : Product Number
YMDNN : Date Code
2C= : Product Code
YMDNN : Date Code
RT7276GCP
RT7276GQW
2C=YM
DNN
RT7275GCP : Product Number
YMDNN : Date Code
RT7275GCP
RT7275GQW
4C= : Product Code
YMDNN : Date Code
RT7275
GCPYMDNN
4C=YM
DNN
RT7275/76
Package Type
CP : TSSOP-14 (Exposed Pad)
QW : WDFN-10L 3x3 (W-Type)
Lead Plating System
G : Green (Halogen Free and Pb Free)
Operating Mode
75 : Continuous Switching Mode
76 : Discontinuous Operating Mode
at Light Load
RT7275/76
3
DS7275/76-04 April 2017 www.richtek.com
©
Copyright 2017 Richtek Technology Corporation. All rights reserved. is a registered trademark of Richtek Technology Corporation.
(V
IN
= 12V, T
A
= 25°C, unless otherwise specified)
Electrical Characteristics
Recommended Operating Conditions
(Note 4)
Supply Input Voltage, VIN --------------------------------------------------------------------------------------- 4.5V to 18V
Junction Temperature Range ------------------------------------------------------------------------------------ 40°C to 125°C
Ambient Temperature Range ------------------------------------------------------------------------------------ 40°C to 85°C
Absolute Maximum Ratings (Note 1)
Supply Input Voltage, VIN, VINR (TSSOP-14 (Exposed Pad)) ----------------------------------------- 0.3V to 21V
Switch Node, SW ------------------------------------------------------------------------------------------------- 0.8V to (V
VIN
+ 0.3V)
Switch Node, SW (<10ns)--------------------------------------------------------------------------------------- 5V to 25V
BOOT to SW ------------------------------------------------------------------------------------------------------- 0.3V to 6V
PVCC ---------------------------------------------------------------------------------------------------------------- 0.3V to 6V
PVCC to VIN (WDFN-10L 3x3) or VINR (TSSOP-14 (Exposed Pad)) --------------------------------- 18V to 0.3V
Other Pins----------------------------------------------------------------------------------------------------------- 0.3V to 21V
Power Dissipation, P
D
@ T
A
= 25°C
TSSOP-14 (Exposed Pad) -------------------------------------------------------------------------------------- 2.50W
WDFN-10L 3x3 ----------------------------------------------------------------------------------------------------- 1.67W
Package Thermal Resistance (Note 2)
TSSOP-14 (Exposed Pad), θ
JA
-------------------------------------------------------------------------------- 40°C/W
WDFN-10L 3x3, θ
JA
----------------------------------------------------------------------------------------------- 60°C/W
WDFN-10L 3x3, θ
JC
----------------------------------------------------------------------------------------------- 7.5°C/W
Junction Temperature Range ------------------------------------------------------------------------------------ 150°C
Lead Temperature (Soldering, 10 sec.) ----------------------------------------------------------------------- 260°C
Storage Temperature Range ------------------------------------------------------------------------------------ 65°C to 150°C
ESD Susceptibility (Note 3)
HBM (Human Body Model) -------------------------------------------------------------------------------------- 2kV
Parameter Symbol Test Conditions Min Typ Max Unit
Supply Current
Supply Current (Shutdown) V
EN
= 0V -- 1 10 A
Supply Current (Quiescent) V
EN
= 3V, V
FB
= 1V -- 0.7 -- mA
Logic Threshold
EN Voltage
Logic High V
IH
1.2 1.5 2
V
Logic Low V
IL
0.4 1.3 1.7
V
FB
Voltage and Discharge Resistance
Feedback Threshold Voltage V
FB_TH
4.5V V
IN
18V 0.757 0.765 0.773 V
Feedback Input Current I
FB
V
FB
= 0.8V 0.1 0 0.1 A
VOUT Discharge Resistance R
DIS
V
EN
= 0V, V
VOUT
= 0.5V -- 50 100
PVCC Output
PVCC Output Voltage V
PVCC
6V V
IN
18V, 0 < I
PVCC
5mA 4.7 5.1 5.5 V
PVCC Line Regulation 6V V
IN
18V, I
PVCC
= 5mA -- -- 20 mV

RT7276GQW

Mfr. #:
Manufacturer:
Description:
IC REG BUCK ADJUSTABLE 3A 10WDFN
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet