Free NetCommander-AXS Management Software is available for access and control of all of your Tripp
Lite NetCommander IP KVM switches (B070 and B072 series). From a single interface, you can access
server ports on any of your KVM switches, power cycle or power on/off outlets of IP PDU's, and manage
KVM settings. This software can be found on the model support page of the B072-016-1-IP, or via
searching NetCommander-AXS on www.tripplite.com
NetCommander 16-Port Cat5 1U Rack-Mount 1+1
User VGA USB KVM Switch with IP Remote
Access
MODEL NUMBER: B072-016-1-IP
Control up to 16 computers from virtually anywhere with one Cat5 KVM switch. This KVM switch with IP
remote access is a smart solution for efficient server control. Low-cost Cat5 cables let you locate servers
up to 100 ft. away.
Description
Tripp Lite’s B072-016-1-IP KVM Switch is the optimal solution for controlling up to 16 computers/servers
locally, from across the room, down the street or around the globe on a network or the Internet.
This KVM switch can be accessed and controlled remotely, so there’s no need to travel to the server room
or network closet. A Java-based application allows access via web browser from any secure IP
connection; a non-browser client that can bypass browser-related Java Security prompts is available.
The B072-016-1-IP uses inexpensive, user-supplied Cat5e/6/6a cabling with Server Interface Units (sold
separately) so you can connect computers/servers located up to 100 ft. away from the switch. This switch
features dual Ethernet ports; if one fails, the other takes over, keeping remote access uninterrupted. Users
can switch easily between the 16 ports using an on-screen display (OSD), hotkey commands or a remote
toolbar. Multi-level password protection prohibits unauthorized users from accessing connected
computers, and a local user and a remote user can each log on and access different ports simultaneously.
Two serial ports allow control of serial-manageable devices such as IP PDUs, firewalls and routers;
individual ports can be assigned to an IP PDU port to power on/off the server connected to that port. This
Highlights
16-port KVM switch provides
control of computers/servers
locally or via your network or the
Internet
●
Occupies just 1U of rack space
●
Low-cost Cat5 cabling allows
longer distances, reduces cable
clutter
●
Simultaneous support for 2
users – 1 local, 1 remote
●
Dual Ethernet ports assure
uninterrupted remote access
●
Compliant with the Federal
Trade Agreements Act (TAA) for
GSA Schedule purchases
●
System Requirements
Computer with HD15 (VGA)
port, and USB port or PS/2
keyboard/mouse ports
●
User-supplied Cat5e/6/6a
cabling
●
B078-101-USB-1 (USB), B078-
101-USB2 or B078-101-PS2
(PS/2) Server Interface Unit is
required for each connected
computer/server
●
For computers with Displayport
or HDMI, change to VGA using
Tripp Lite adapters P134-06N-
VGA-V2 or P131-06N.
Maximum video resolutions
using adapters may vary.
●
Compatible with Windows and
Linux operating systems
●
Currently not compatible with
HP Gen 10 Servers
●
Remote access supported using
●
1 / 5
