F–52
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
Cap
Compatible with S actuator
PART NO.
896801000
WHITE
896802000
BLACK
896803000
RED
Material: Polyethylene
Finish: Matte
Cap
Compatible with S actuator
PART NO.
706201000
WHITE
706202000
BLACK
706203000
RED
Material: Vinyl
Finish: Matte
L43 Actuator
PART NO.
481202000
BLACK
481203000
RED
Material: Nylon
Finish: Matte
NOTE: Additional nuts, locking rings
and lockwashers available
separately, see Section N.
Other colors available, consult
Customer Service Center.
9000 Series
Power Toggle Switches
CONTACT MATERIAL
SEAL
AVAILABLE HARDWARE
Not available with 9221 model or Z4 terminations. Must be ordered with 9221 model and Z4 termination.
GP (general purpose) 6 AMPS 125 VAC 50/60 Hz T85 10,000 cycles (10E3)
3 AMPS 250 VAC 50/60 Hz T85 10,000 cycles
R (resistive) 6 AMPS 30 VDC T85 10,000 cycles
GP (general purpose) 10 AMPS 125 VAC 50/60 Hz T85 10,000 cycles
5 AMPS 250 VAC 50/60 Hz T85 10,000 cycles
R (resistive) 10 AMPS 30 VDC T85 10,000 cycles
SILVER OR TIN
2,5
TIN
5
SILVER
1,2
SILVER CADMIUM OXIDE
3,4,6
9201
9221
Q
RATINGS
TERMINAL
PLATING
CONTACT MATERIALMODEL
OPTION
CODE
1
END CONTACTS: Coin silver, silver plated.
2
CENTER CONTACTS & ALL TERMINALS: Copper alloy, silver plated.
3
END CONTACTS: Silver cadmium oxide.
4
CENTER CONTACTS: Copper alloy, silver plated.
5
Z4 TERMINALS ONLY: Copper alloy, matte-tin plated.
6
Cadmium in electrical switch contacts is exempt from RoHS.
NOTE: Any models supplied with Q contact material are RoHS compliant.
All 9000 Series models meet international dimensional and electrical requir
ements.
9221 model must be ordered with Z4 terminations and D seal option.
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
E
EPOXY SEAL
D
NO EPOXY SEAL
16 [0.630]
ø 2 [ 0.079]
15/32-32, NS-2A
.464 (11,79)
1/4-40 uns-2A nut
.524 (13,3)
.658 (16,7)
.204 (5,2)
15/32-32 NS-2A
ø .331 (8,4)
.945 (24,0)
.657 (16,7)
759D02000 Sealing Boot 703D02000 Sealing Boot
704D02000 Sealing Boot
NOTE: For use with S actuator style when combined
with H3 and H bushings
NOTE: For use with T style actuator NOTE: For use with T style actuator
