MIC5305YML-TR

MIC5305
150mA µCap Ultra-Low Dropout
LDO Regulator
MLF and MicroLeadFrame are registered trademarks of Amkor Technology, Inc.
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
June 2007 1
M9999-062507
General Description
The MIC5305 is a high-performance, 150mA LDO regula-
tor, offering extremely high PSRR and very low noise while
consuming low ground current.
Ideal for battery-operated applications, the MIC5305
features 1% accuracy, extremely low-dropout voltage
(60mV @ 150mA), and low ground current at light load
(typically 90µA). Equipped with a logic-compatible enable
pin, the MIC5305 can be put into a zero-off-mode current
state, drawing no current when disabled.
The MIC5305 is a µCap design operating with very small
ceramic output capacitors for stability, thereby reducing
required board space and component cost.
The MIC5305 is available in xed output voltages and
adjustable output voltages in the super-compact 6-pin
2mm × 2mm MLF
®
leadless package, our new ultra-thin
6-pin 2mm × 2mm Thin MLF
®
and thin SOT-23-5 package.
Additional voltage options are available. Contact Micrel
marketing.
Data sheets and support documentation can be found on
Micrel’s web site at www.micrel.com.
Features
Ultra-low dropout voltage of 60mV @ 150mA
Input voltage range: 2.25 to 5.5V
Stable with ceramic output capacitor
150mA guaranteed output current
Low output noise — 20µVrms
Low quiescent current of 90µA total
High PSRR, up to 85dB @1kHz
Less than 30µs turn-on time w/C
BYP
= 0.01µF
High output accuracy:
±1.0% initial accuracy
±2.0% over temperature
Thermal shutdown protection
Current limit protection
Tiny 6-pin 2mm × 2mm MLF
®
package
Ultra-Thin 6-pin 2mm × 2mm Thin MLF
®
package
Thin SOT-23-5 package
Applications
Cellular phones
PDAs
Fiber optic modules
Portable electronics
Notebook PCs
Audio Codec power supplies
Typical Application
0
10
20
30
40
50
60
70
0 20 40 60 80 100 120 140
DROPOUT VOLTAGE (mV)
OUTPUT CURRENT (mA)
Dropout Voltage
MIC5305
VOUTVIN
BYPEN
GND
3.0V
V
IN
2.85V@150mA
V
OUT
1µF0.1µF
1µF
0
10
20
30
40
50
60
70
80
90
100
0.1 1 10 100
PSRR (dB)
FREQUENCY (kHz)
PSR
R
(Bypass Pin Cap = 0.1µF)
150mA
50mA
10A
1k
Micrel, Inc. MIC5305
June 2007 2
M9999-062507
Ordering Information
Part Number Marking
Standard Pb-Free Standard Pb-Free*
Voltage
Junction
Temp. Range
(1)
Package
MIC5305-1.5BML MIC5305-1.5YML 815 815 1.5V –40°C to +125°C 6-Pin 2x2 MLF
®
MIC5305-1.8BML MIC5305-1.8YML 818 818 1.8V –40°C to +125°C 6-Pin 2x2 MLF
®
MIC5305-2.0YML 820 2.0V –40°C to +125°C 6-Pin 2x2 MLF
®
MIC5305-2.5BML MIC5305-2.5YML 825 825 2.5V –40°C to +125°C 6-Pin 2x2 MLF
®
MIC5305-2.6BML MIC5305-2.6YML 826 826 2.6V –40°C to +125°C 6-Pin 2x2 MLF
®
MIC5305-2.7BML MIC5305-2.7YML 827 827 2.7V –40°C to +125°C 6-Pin 2x2 MLF
®
MIC5305-2.8BML MIC5305-2.8YML 828 828 2.8V –40°C to +125°C 6-Pin 2x2 MLF
®
MIC5305-2.85BML MIC5305-2.85YML 82J 82J 2.85V –40°C to +125°C 6-Pin 2x2 MLF
®
MIC5305-2.9BML MIC5305-2.9YML 829 829 2.9V –40°C to +125°C 6-Pin 2x2 MLF
®
MIC5305-3.0BML MIC5305-3.0YML 830 830 3.0V –40°C to +125°C 6-Pin 2x2 MLF
®
MIC5305-3.3BML MIC5305-3.3YML 833 833 3.3V –40°C to +125°C 6-Pin 2x2 MLF
®
MIC5305-4.75BML MIC5305-4.75YML 84H 84H 4.75V –40°C to +125°C 6-Pin 2x2 MLF
®
MIC5305BML MIC5305YML 8AA 8AA ADJ –40°C to +125°C 6-Pin 2x2 MLF
®
MIC5305-2.8YMT 828** 2.8V –40°C to +125°C 6-Pin 2x2 Thin MLF
®
MIC5305-4.6YMT 846** 4.6V –40°C to +125°C 6-Pin 2x2 Thin MLF
®
MIC5305-1.5BD5 MIC5305-1.5YD5 N815 N815 1.5V –40°C to +125°C Thin SOT23-5
MIC5305-1.8BD5 MIC5305-1.8YD5 N818 N818 1.8V –40°C to +125°C Thin SOT23-5
MIC5305-2.5BD5 MIC5305-2.5YD5 N825 N825 2.5V –40°C to +125°C Thin SOT23-5
MIC5305-2.6BD5 MIC5305-2.6YD5 N826 N826 2.6V –40°C to +125°C Thin SOT23-5
MIC5305-2.7BD5 MIC5305-2.7YD5 N827 N827 2.7V –40°C to +125°C Thin SOT23-5
MIC5305-2.8BD5 MIC5305-2.8YD5 N828 N828 2.8V –40°C to +125°C Thin SOT23-5
MIC5305-2.85BD5 MIC5305-2.85YD5 N82J N82J 2.85V –40°C to +125°C Thin SOT23-5
MIC5305-2.9BD5 MIC5305-2.9YD5 N829 N829 2.9V –40°C to +125°C Thin SOT23-5
MIC5305-3.0BD5 MIC5305-3.0YD5 N830 N830 3.0V –40°C to +125°C Thin SOT23-5
MIC5305-3.3BD5 MIC5305-3.3YD5 N833 N833 3.3V –40°C to +125°C Thin SOT23-5
MIC5305-4.75BD5 MIC5305-4.75YD5 N84H N84H 4.75V –40°C to +125°C Thin SOT23-5
Note:
1. For other output voltage options, contact Micrel marketing.
* Underbar/Overbar symbols may not be to scale.
** Pin 1 identifier for 2x2 Thin MLF
®
is “” symbol.
Micrel, Inc. MIC5305
June 2007 3
M9999-062507
Pin Configuration
1EN
GND
VIN
6 BYP
NC
VOUT
5
4
2
3
1EN
GND
VIN
6 BYP
ADJ
VOUT
5
4
2
3
MIC5305-x.xBML/YML (Fixed)
6-Pin 2mm x 2mm MLF
®
(ML)
(Top View)
MIC5305-x.xBML/YML (Adjustable)
6-Pin 2mm x 2mm MLF
®
(ML)
(Top View)
1EN
GND
VIN
6 BYP
NC
VOUT
5
4
2
3
VIN
VOU
T
BYP
EN
KWxx
13
45
2
GND
MIC5305-x.xYMT (Fixed)
6-Pin 2mm x 2mm Thin MLF
®
(MT)
(Top View)
MIC5305-x.xBD5/YD5 (Fixed)
TSOT-23-5 (D5)
(Top View)
Pin Description
Pin Number
MLF-6
Fixed
Pin Number
MLF-6
Adjustable
Pin Number
Thin MLF-6
Fixed
Pin Number
TSOT23-5
Fixed
Pin Name Pin Name
1 1 1 3 EN Enable Input. Active High. High = on, low = off. Do not leave
floating.
2 2 2 2 GND Ground.
3 3 3 1 VIN Supply Input.
4 4 4 5 VOUT Output Voltage.
5 ADJ Adjust Input: Connect to external resistor voltage divider
network.
5 5 NC No connection for xed voltage parts.
6 6 6 4 BYP Reference Bypass: Connect external 0.1µF to GND for reduced
output noise. May be left open.
HS Pad HS Pad HS Pad EPAD Exposed Heatsink Pad connected to ground internally.

MIC5305YML-TR

Mfr. #:
Manufacturer:
Microchip Technology / Micrel
Description:
LDO Voltage Regulators 150mA uCap Ultra LDO Regulator
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union