THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
*
*
DO NOT
SCALE FROM
THIS PRINT
EHT-1XX-01-XX-D-XX-XX-X-XX-XX
No OF POSITIONS
-05 THRU -25
LEAD STYLE
-01
PLATING SPECIFICATION
-S: 30µ" GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
-F: 3µ" GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
-T: MATTE TIN.
-H: 30µ" GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL.
-L: 10µ" GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
-SM: 30µ" GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
-FM: 3µ" GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
-TM: MATTE TIN.
-LM: 10µ" GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
TAIL OPTION
-RA: RIGHT ANGLE (FIG 2, SHT 2)
-SM: SURFACE MOUNT (SEE FIG 4, SHT 2)
(LEAVE BLANK FOR THRU HOLE)
ROW SPECIFICATION
-D: DOUBLE
OPTION 3
-TR: TAPE AND REEL PACKAGING
(FOR -SM, -SM-P, AND -SM-K ONLY)
OPTION 2
-LC: LOCKING CLIP(SEE NOTE 4)
( FOR -SM ONLY)
(SEE FIG 4, SHT 2, USE LC-09-TM)
POLARIZED OPTION
-XX = PIN OMITTED
No OF POS x .0787[2.000] + .543[13.79] REF
.100 2.54
REF
.300 7.62
REF
No OF POS x .0787[2.000] + .177[4.50] REF
.020 0.51
REF
.1775
REF
4.509
.0787 2.000
(No OF POS x .0787[2.000]) - .0787[2.000] ±.005[0.13]
.311 7.90
REF
"A"
"A"
01
02
C
L
POLARIZATION
WINDOW
.370 9.40
REF
.120 3.04
REF
.020 0.50
SQ
REF (TYP)
2
MAX SWAY
(EITHER DIRECTION)
SECTION "A"-"A"
SCALE 2.5 : 1
EHH-XX-D
POS 1 INDICATOR
T-1S13-05-XXX-2
(SEE TABLE 2)
.114 2.90
2
MAX SWAY
(EITHER DIRECTION)
C
C
FIG1
(EHT-105-01-XX-D SHOWN)
(LATCH EHA-01 REMOVED FOR CLARITY)
OPTION 1
-P: PICK & PLACE PAD (SEE FIG 5, SHT 2)
(FOR -SM ONLY, USE PPP-24)
(USE PPP-55 WITH -SM-TR OPTION)
-K: OPTION (POLYIMIDE FILM, SEE FIG 3, SHT 2)
(FOR -SM ONLY)
C
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01 [0.3] 2
.XXX:
.005 [0.13]
.XXXX:
.0020 [0.051]
MATERIAL:
2MM EJECTOR HEADER ASSEMBLY
BY:
EHT-1XX-01-XX-D-XX-XX-X-XX-XX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
PURVIS
02/28/1994
3
1
SHEET SCALE: 2:1
F:\DWG\MISC\MKTG\EHT-1XX-01-XX-D-XX-XX-X-XX-XX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM PUSHOUT FORCE: 1 LB.
3. MAXIMUM PIN ROTATION IN BODY: 2°
4.
DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED,
THE –LC OPTION IS NOT COMPATIBLE WITH AUTO PLACEMENT.
SAMTEC RECOMMENDS MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE –LC OPTION.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
INSULATOR: LCP, UL 94 VO, COLOR: BLACK
TERMINAL: PHOS BRONZE
REVISION BF
