ACPL-T350-060E

ACPL-T350
2.5 Amp Output Current IGBT Gate Driver Optocoupler with Low I
CC
Data Sheet
Description
The ACPL-T350 contains a GaAsP LED. The LED is optically
coupled to an integrated circuit with a power output
stage. These optocouplers are ideally suited for driving
power IGBTs and MOSFETs used in motor control inverter
applications. The high operating voltage range of the
output stage provides the drive voltages required by
gate controlled devices. The voltage and current supplied
by these optocouplers make them ideally suited for
directly driving IGBTs with ratings up to 1200 V/100 A.
For IGBTs with higher ratings, the ACPL-T350 series can
be used to drive a discrete power stage whichs drives the
IGBT gate. The ACPL-T350 has an insulation voltage of
V
IORM
= 630 Vpeak (Option 060).
Functional Diagram
Features
2.5A Absolute Maximum Peak Output Current
15 kV/μs minimum Common Mode Rejection (CMR) at
V
CM
= 1500 V
1.5 V maximum low level output voltage (V
OL
)
I
CC
= 4 mA maximum supply current
Under Voltage Lock-Out protection (UVLO) with
hysteresis
Wide operating V
CC
range: 15 to 30 Volts
500 ns maximum switching speeds
Industrial temperature range: -40°C to 100°C
Safety Approval
- UL Recognized 3750 Vrms for 1 min.
- CSA Approval
- IEC/EN/DIN EN 60747-5-5 Approved
V
IORM
= 630 V
peak
(Option 060)
Applications
IGBT/MOSFET gate drive
Inverter for Home Appliances
Industrial Inverters
Switching Power Supplies (SPS)
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.
1
3
SHIELD
2
4
8
6
7
5
N/C
CATHODE
ANODE
N/C
V
CC
V
O
V
O
V
EE
ACPL-T350
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Note: A 0.1 μF bypass capacitor must be connected between pins V
CC
and V
EE
.
UVLO Truth Table
LED
V
CC
– V
EE
“POSITIVE GOING”
(i.e., TURN-ON)
V
CC
– V
EE
“NEGATIVE GOING”
(i.e., TURN-OFF) V
O
OFF 0 - 30 V 0 - 30 V LOW
ON 0 - 11 V 0 - 9.5 V LOW
ON 11 - 13.5 V 9.5 - 12 V TRANSITION
ON 13.5 - 30 V 12 - 30 V HIGH
2
Regulatory Information
The ACPL-T350 is approved by the following organizations:
Ordering Information
ACPL-T350 is UL Recognized with 3750 Vrms for 1 minute per UL1577.
Part
number
Option
Package Surface Mount Gull Wing Tape& Reel
IEC/EN/DIN EN
60747-5-5 QuantityRoHS Compliant
ACPL-T350 -000E 300mil DIP-8 50 per tube
-300E X X 50 per tube
-500E/500ME X X X 1000 per reel
-060E X 50 per tube
-360E X X X 50 per tube
-560E/560ME XXXX1000 per reel
To order, choose a part number from the part number column and combine with the desired option from the option
column to form an order entry.
Example 1:
ACPL-T350-560E to order product of 300mil DIP Gull Wing Surface Mount package in Tape and Reel packaging with
IEC/EN/DIN EN 60747-5-5 Safety Approval in RoHS compliant.
Example 2:
ACPL-T350-000E to order product of 300mil DIP package in tube packaging and RoHS compliant.
Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.
Remarks: The notation ‘#XXX’ is used for existing products, while (new) products launched since 15th July 2001 and
RoHS compliant option will use ‘-XXXE‘.
IEC/EN/DIN EN 60747-5-5 (ACPL-T350 Option 060 only)
Approval under:
DIN EN 60747-5-5 (VDE 0884-5):2011-11
EN 60747-5-5:2011
UL
Approval under UL 1577, component recognition
program, File E55361.
CSA
Approval under CSA Component Acceptance Notice #5,
File CA 88324.
Recommended Pb-Free IR Pro le
Recommended re ow condition as per JEDEC Standard, J-STD-020 (latest revision). Non-Halide Flux should be used.
3
Package Outline Drawings
ACPL-T350 Outline Drawing
1.080 – 0.320
(0.043 – 0.013)
2.54 – 0.25
(0.100 – 0.010)
0.51 (0.020) MIN.
0.65 (0.025) MAX.
4.70 (0.185) MAX.
2.92 (0.115) MIN.
5
°
TYP.
0.254
+ 0.076
- 0.051
(0.010
+ 0.003)
- 0.002)
7.62 – 0.25
(0.300 – 0.010)
6.35 – 0.25
(0.250 – 0.010)
9.65 – 0.25
(0.380 – 0.010)
1.78 (0.070) MAX.
1.19 (0.047) MAX.
A XXXXZ
YYWW
DATE CODE
DIMENSIONS IN MILLIMETERS AND (INCHES).
5678
4321
OPTION CODE*
TYPE NUMBER
* MARKING CODE LETTER FOR OPTION NUMBERS.
"V" = OPTION 060
OPTION NUMBERS 300 AND 500 NOT MARKED.
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.
3.56 – 0.13
(0.140 – 0.005)
0.635 – 0.25
(0.025 – 0.010)
12
°
NOM.
9.65 – 0.25
(0.380 – 0.010)
0.635 – 0.130
(0.025 – 0.005)
7.62 – 0.25
(0.300 – 0.010)
5
6
7
8
4
3
2
1
9.65 – 0.25
(0.380 – 0.010)
6.350 – 0.25
(0.250 – 0.010)
1.016 (0.040)
1.27 (0.050)
10.9 (0.430)
2.0 (0.080)
LAND PATTERN RECOMMENDATION
1.080 – 0.320
(0.043 – 0.013)
3.56 – 0.13
(0.140 – 0.005)
1.780
(0.070)
MAX.
1.19
(0.047)
MAX.
2.54
(0.100)
BSC
DIMENSIONS IN MILLIMETERS (INCHES).
LEAD COPLANARITY = 0.10 mm (0.004 INCHES).
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.
0.254
+ 0.076
- 0.051
(0.010
+ 0.003)
- 0.002)
ACPL-T350 Outline Drawing

ACPL-T350-060E

Mfr. #:
Manufacturer:
Broadcom / Avago
Description:
Logic Output Optocouplers 2.5A IGBT Gate Drive
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union