THIRD ANGLE PROJ.
DATEDESCRIPTIONREV
REVISIONS
ECO APPR
CAD FILE
REV
DWG SIZE
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN METRIC AND TOLERANCES ARE:
6 - 30mm
0.5 - 6mm
30 - 120mm
ANGLES
<0.5mm
7,15
.282[ ]
12,6
.496[ ]
20,9
.823[ ]
7,5
.295[ ]
6,6
.260[ ]
5,6
.220[ ]
4,14
.163[ ]
18,5 .728[ ]
24,85 .978[ ]
2,8
.110[ ]
REF30,7
1.209[ ]
REF24,35
.959[ ]
18,08
.712[ ]
12,7
.500[ ]
3,41
.13[ ]
1,42 .06[ ]
A RELEASE TO MFG. 25-Mar-15 2887 BCG
A
B
REFERENCE
EAR#6467 N1112B2-AT5GP-LMR240-50
CONFIGURATION LEVEL: In Work
NOTICE - These drawings, specifications, or other data (1) are, and remain the
property of Amphenol corp. (2) must be returned upon request; and (3) are
confidential and not to be disclosed to any person other than those to whom they
are given by Amphenol Corp. the furnishing of these drawings, specifications, or
other data by Amphenol Corp., or to any other person to anyone for any purpose is
not to be regarded by implication or otherwise in any manner licensing, granting
rights to permitting such holder or any other person to manufacture, use or sell any
product, process or design, patented or otherwise, that may in any way be related to
or disclosed by said drawings, specifications, or other data.
SHEET 3 OF 3
SCALE: 3.0:1.025-Mar-15B.C. GLEISSNER
TITLE
N R/A CRIMP PLUG
FOR LMR-240
DATEAPPROVED
Amphenol
Connex
DATE
04-Dec-14
ENGINEER
B.C. GLEISSNER
MATERIAL
-
DATE
04-Dec-14
DRAWN
J.CHEN
FINISH
DRAWING NO.
ITEM NO.
PART NO. 172385
NOTES:
1. MATERIAL AND FINISH (PLATING THICKNESS IN MICRO-INCHES):
BODY - BRASS, ALBALOY PLATING
CONTACT PIN - BRASS, GOLD PLATING
INSULATOR - PTFE, NATURAL
2. ELECTRICAL:
A. IMPEDANCE:50 OHM
B. FREQUENCY RANGE: DC- 6 GHz
C. VSWR: 1.2 MAX. @ DC- 4 GHz
D. INSULATION RESISTANCE:5000 OHM MIN.
E INSERTION LOSS : <0.3 dB TO <0.7dB @ DC - 4 GHz
F. DIELECTRIC WITHSTANDING VOLTAGE:2500 VRMS. MIN
3. MECHANICAL:
A. MATING CYCLES:500 MIN.
B. TEMPERATURE RANGE:-65$C TO +165$C
4. RECOMMENDED CABLE ASSEMBLY INSTRUCTIONS:
A. TRIM CABLE AS SHOWN.
B. SLIDE FERRULE & SPACER ONTO CABLE.
C. INSERT CABLE WITH FOIL ENTERING CONNECTOR AND BRAID OVER KNURL.
D. SOLDER CABLE CENTER CONDUCTOR TO CONTACT.
E. CRIMP USING TOOL 227-944,DIE 227-1221-13(.255 HEX).
F. THREAD CAP INTO BODY
5. SHOWS CABLE ENTRY DIMENSIONS.
RECOMMENDED CABLE
STRIPPING DIM'S
5
5
SCALE 1.000
19 HEX.
[.748]
FERRULE
CAP
SPACER
SECTION A-A
CUT FOIL 1 MM MIN.
CUSTOMER OUTLINE DRAWING
ALL OTHER SHEETS ARE FOR INTERNAL USE ONLY
