NJM4580
-
-
Ver.2012-09-14
■ABSOLUTE MAXIMUM RATINGS (Ta=25°C, unless otherwise noted.)
PARAMETER SYMBOL RATING UNIT
Supply Voltage V
+
/V
-
±18 V
Input Voltage V
ICM
±15 (Note1) V
Differential Input Voltage V
ID
±30 (Note1) V
Power Dissipation P
D
DIP8, SIP8 : 800
DMP8, SOP8 : 300
SSOP8 : 250
MSOP8(VSP8) : 400 (Note2)
mW
Operating Temperature Range Topr -40~+85 °C
Storage Temperature Range Tstg -40~+125 °C
(Note1) For supply voltage less than ±15V, the absolute maximum input voltage is equal to supply voltage.
(Note2) On the PCB "EIA/JEDEC (114.3×76.2×1.57mm, 2 layers, FR-4)"
■ RECOMMENDED OPERATING CONDITIONS (Ta=25°C)
PARAMETER SYMBOL CONDITION MIN. TYP. MAX. UNIT
Supply Voltage V
+
/V
-
±2 - ±18 V
■ ELECTRICAL CHARACTERISTICS (V
+
/V
-
=±15V, Ta=25°C, unless otherwise noted.)
PARAMETER SYMBOL TEST CONDITION MIN. TYP. MAX. UNIT
Input Offset Voltage V
IO
R
S
≤10kΩ - 0.3 3 mV
Input Offset Current I
IO
- 5 200 nA
Input Bias Current I
B
- 100 500 nA
Voltage Gain A
V
R
L
≥2kΩ,V
O
=±10V 90 110 - dB
Maximum Output Voltage V
OM
R
L
≥2kΩ ±12 ±13.5 - V
Common Mode Input Voltage Range V
ICM
±12 ±13.5 - V
Common Mode Rejection Ratio CMR R
S
≤10kΩ 80 110 - dB
Supply Voltage Rejection Ratio SVR R
S
≤10kΩ 80 110 - dB
Supply Current I
CC
- 6 9 mA
Slew Rate SR R
L
≥2kΩ - 5 - V/µs
Gain Bandwidth Product GB f=10kHz - 15 - MHz
Total Harmonic Distortion THD A
V
=20dB,V
O
=5V,R
L
=2kΩ,f=1kHz - 0.0005 - %
Equivalent Input Noise Voltage V
NI
RIAA,R
S
=2.2kΩ,30kHz LPF - 0.8 - µVrms
■ ELECTRICAL CHARACTERISTICS (D-rank type
(Note3), V
+
/V
-
=±15V, Ta=25°C, unless otherwise noted.)
PARAMETER SYMBOL TEST CONDITION MIN. TYP. MAX. UNIT
Equivalent Input Noise Voltage V
NI
RIAA,R
S
=2.2kΩ - - 1.4 µVrms
(Note3)D-rank type is a Equivalent Input Noise Voltage selected product. It s only DIP, DMP, SOP and SIP package.
