SPEC NO: DSAG0287 REV NO: V.9A DATE: JAN/12/2015 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: P.Cheng ERP: 1351000425
Selection Guide
Note:
1. Luminous intensity/ luminous Flux: +/-15%.
*Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
Iv (ucd) [1]
@ 10mA
Description
Min. Typ.
ACSA56-41CGKWA-F01 Green (AlGaInP) White Diffused
9000 25000
*2200 *4600
Common Anode,Rt.
Hand Decimal.
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Green 574
nm I
F=20mA
λD [1] Dominant Wavelength Green 570
nm I
F=20mA
Δλ1/2 Spectral Line Half-width Green 20
nm I
F=20mA
C Capacitance Green 15
pF V
F=0V;f=1MHz
V
F [2] Forward Voltage Green 2.1 2.5 V IF=20mA
I
R Reverse Current Green
10 uA VR=5V
Parameter Green Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 150 mA
Reverse Voltage 5 V
Operating / Storage Temperature -40°C To +85°C
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
4. Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
