OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

MAX627MJA/883B

P1-P3
SCOPE: DUAL POWER MOSFET DRIVER
Device Type Generic Number
Circuit Function
01 MAX626M(x)/883B Dual Power Inverting MOSFET Driver
02 MAX627M(x)/883B Dual Power Noninverting MOSFET Driver
03 MAX628M(x)/883B Dual Power Inverting/Noninverting MOSFET Driver
04 TSC426M(x)/883B Dual Power Inverting MOSFET Driver
05 TSC427M(x)/883B Dual Power Noninverting MOSFET Driver
06 TSC428M(x)/883B Dual Power Inverting/Noninverting MOSFET Driver
Case Outline(s). The case outlines shall be designated in Mil-Std-1835 and as follows:
Outline Letter Mil-Std-1835
Case Outline Package Code
JA GDIP1-T8 or CDIP2-T8 8 LEAD CERDIP J8
NP CQCC1-N20 20 Leadless Carrier L20
Absolute Maximum Ratings
Supply Voltage V
DD
to GND ...............................................................................………... 20V
Input Voltage ......................................................................………..V
DD
+0.3V to GND -0.3V
Output Current (per pin, capacitive load) ...........................................................……….. 1.5A
Peak Supply Current or GND Current (per pin) ..................................................………. 3.0A
Lead Temperature (soldering, 10 seconds) ....................................................................... +300°C
Storage Temperature .......................................................................................... -65°C to +150°C
Continuous Power Dissipation ..........................................................................…….. T
A
=+70°C
8 pin CERDIP(derate 8.0mW/°C above +70°C) .....................................................……. 640mW
20 pin LCC(derate 9.1mW/°C above +70°C) .........................................................……. 727mW
Junction Temperature T
J
......................................................................................…….. +150°C
Thermal Resistance, Junction to Case, ΘJC
8 pin CERDIP..................................................................................................……... 55°C/W
20 pin LCC .....................................................................................................…….... 20°C/W
Thermal Resistance, Junction to Ambient, ΘJA:
8 pin CERDIP................................................................................................……... 125°C/W
20 pin LCC ...................................................................................................……... 110°C/W
Recommended Operating Conditions
Ambient Operating Range (T
A
) .........................................................……….. -55°C to +125°C
Supply Voltage Range ..........................................................................……….. 4.5V≤V
DD
≤18V
ORDERING INFORMATION:
Package Device Part # Device Part #
8 pin CERDIP 01 MAX626MJA/883B 04 TSC426MJA/883B
20 pin LCC 01 MAX626MNP/883B 04 TSC426MNP/883B
8 pin CERDIP 02 MAX627MJA/883B 05 TSC427MJA/883B
20 pin LCC 02 MAX627MNP/883B 05 TSC427MNP/883B
8 pin CERDIP 03 MAX628MJA/883B 06 TSC428MJA/883B
20 pin LCC 03 MAX628MNP/883B 06 TSC428MNP/883B
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device.
These are stress ratings only, and functional operation of the device at these or any other conditions beyond
those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
---------------------------- Electrical Characteristics of MAX626/627/628/883B and 19-0029 Rev. C
TSC426/427/428/883B Page 2 of 5
TABLE 1. ELECTRICAL TESTS:
TEST Symbol
CONDITIONS
-55 °C <=T
A
<= +125°C
+4.5V≤V
DD
≤18V
Unless otherwise specified
Group A
Subgroup
Device
type
Limits
Min
Limits
Max
Units
Logic 1 Input Voltage V
IH
1,2,3 All
2.4 V
Logic 0 Input Voltage V
IL
1,2,3
All
0.8 V
Input Voltage Range V
IN
(max) 1,2,3
All
0V
DD
V
Input Current I
IN
V
IN
=0V to 18V 1
2,3
All
±1
±10
µA
Output High Voltage V
OH
RL=∞
1,2,3
All
V
DD
-25 mV
Output Low Voltage V
OL
RL=∞
1,2,3
All
25 mV
Output Resistance R
OUT
V
DD
=18V, I
OUT
=10mA
NOTE 3, NOTE 4
1,2
3
All
20
15
Ω
Power Supply Current I
S1
V
IN
=+3V, both inputs 1,2
3
All
8
12
mA
Power Supply Current I
S2
V
IN
=0V, both inputs 1,2
3
All
0.4
0.6
mA
Rise Time t
R
V
DD
=18V NOTE 2
9
10,11
10,11
All
01,02,03
04,05,06
30
40
60
ns
Fall Time t
F
V
DD
=18V NOTE 2 9
10,11
All
30
40
ns
Delay Time t
D1
V
DD
=18V NOTE 2
9
10,11
9
10,11
01,02,03
04,05,06
30
40
40
60
ns
Delay Time t
D2
V
DD
=18V NOTE 2
9
10,11
9
10,11
01,02,03
04,05,06
50
75
60
120
ns
NOTE 1: Guaranteed by design.
NOTE 2: Subgroups 10 and 11 are guaranteed if not tested to the limits specified in Table 1.
NOTE 3: V
IN
=0.8V for inverting stages, V
IN
=2.4V for noninverting stages.
NOTE 4: V
IN
=2.4V for inverting stages, V
IN
=0.8V for noninverting stages.
TERMINAL CONNECTIONS FOR 01, 02, 03, 04, 05, 06
8 PIN CERDIP 20 PIN LCC
01,04 02,05 03,06 01,04 02,05 03,06 01,04 02,05 03,06
1 NC NC NC 1 NC NC NC 11 NC NC NC
2 INA INA INA 2 NC NC NC 12 NC NC NC
3 GND GND GND 3 NC NC NC 13 NC NC NC
4 INB INB INB 4 INA INA INA 14 _____
OUTB
OUTB OUTB
5 _____
OUTB
OUTB OUTB 5 NC NC NC 15 NC NC NC
6V
DD
V
DD
V
DD
6 GND GND GND 16 V
DD
V
DD
V
DD
7 _____
OUTA
OUTA _____
OUTA
7NC NC NC 17NC NC NC
8 NC NC NC 8 INB INB INB 18 _____
OUTA
OUTA _____
OUTA
9NC NC NC 19NC NC NC
10 NC NC NC 20 NC NC NC
---------------------------- Electrical Characteristics of MAX626/627/628/883B 19-0029 Rev. C
and TSC426/427/428/883C Page 3 of 5
QUALITY ASSURANCE
Sampling and inspection procedures shall be in accordance with MIL-Prf-38535, Appendix A as specified in Mil-
Std-883.
Screening shall be in accordance with Method 5004 of Mil-Std-883. Burn-in test Method 1015:
1. Test Condition, A, B, C, or D.
2. TA = +125°C minimum.
3. Interim and final electrical test requirements shall be specified in Table 2.
Quality conformance inspection shall be in accordance with Method 5005 of Mil-Std-883, including Groups A, B,
C, and D inspection.
Group A inspection:
1. Tests as specified in Table 2.
2. Selected subgroups in Table 1, Method 5005 of Mil-Std-883 shall be omitted.
Group C and D inspections:
a. End-point electrical parameters shall be specified in Table 1.
b. Steady-state life test, Method 1005 of Mil-Std-883:
1. Test condition A, B, C, D.
2. TA = +125°C, minimum.
3. Test duration, 1000 hours, except as permitted by Method 1005 of Mil-Std-883.
TABLE 2. ELECTRICAL TEST REQUIREMENTS
Mil-Std-883 Test Requirements Subgroups
per Method 5005, Table 1
Interim Electric Parameters
Method 5004
1
Final Electrical Parameters
Method 5005
1*, 2, 3, 9, 10**, 11**
Group A Test Requirements
Method 5005
1, 2, 3, 9, 10**, 11**
Group C and D End-Point Electrical Parameters
Method 5005
1
* PDA applies to Subgroup 1 only.
** Subgroups 10 and 11, if not tested, shall be guaranteed to the specified limits of Table 1.
---------------------------- Electrical Characteristics of MAX626/627/628/883B 19-0029 Rev. C
and TSC426/427/428/883B Page 4 of 5
P1-P3

MAX627MJA/883B

Mfr. #:
Buy MAX627MJA/883B
Manufacturer:
Maxim Integrated
Description:
Gate Drivers Dual-Power MOSFET Driver
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet