OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

TCME108M004R0010

P1-P3
116
102616
TCM
Type
E
Case Size
See table
above
108
Capacitance Code
pF code: 1st two digits
represent significant figures,
3rd digit represents multiplier
(number of zeros to follow)
M
Tolerance
M=±20%
004
Rated DC Voltage
002=2.5Vdc
004=4Vdc
006=6.3Vdc
010=10Vdc
035=35Vdc
100=100Vdc
HOW TO ORDER
R
Packaging
R = Pure Tin 7" Reel
S = Pure Tin 13" Reel
H = Tin Lead 7" Reel
(contact manufacturer)
K = Tin Lead 13" Reel
(contact manufacturer)
Technical Data: All technical data relate to an ambient temperature of +25°C
Capacitance Range: 10 μF to 1000 μF
Capacitance Tolerance: ±20%
Leakage Current DCL: 0.1CV
Rated Voltage (V
R
) +85°C: 2.5 4 6.3 10 35 100
Category Voltage (V
C
) +105°C: 2 3.2 5 8 28 80
Surge Voltage (V
S
) +85°C: 3.3 5.2 8 13 46 130
Surge Voltage (V
S
) +105°C: 2.5 4 6 10 35 100
Temperature Range: -55ºC to +105ºC
Reliability:
1% per 1000 hours at 85°C, V
R
with 0.1Ω/V series impedance, 60% confidence level
Termination Finish: Sn Plating (standard) and SnPb Plating upon request
TECHNICAL SPECIFICATIONS
TCM Series
Conductive Polymer Solid Electrolytic Chip Multianode Capacitors
CASE DIMENSIONS: millimeters (inches)
Code
EIA EIA L±0.20 W+0.20 (0.008) H+0.20 (0.008) W
1
±0.20 A+0.30 (0.012)
S Min.
Code Metric (0.008) -0.10 (0.004) -0.10 (0.004) (0.008) -0.20 (0.008)
E 2917 7343-43 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
V 2924 7361-38 7.30 (0.287) 6.10 (0.240) 3.55 (0.140) 3.10 (0.120) 1.30 (0.051) 4.40 (0.173)
W1 dimension applies to the termination width for A dimensional area only.
0010
ESR in mΩ
Elektra Award 2010
XXXXX
156 J
AVX LOGO
Polymer
Capacitance Value in pF
156 = 15µF
Rated Voltage
J = 6.3V
ID Code
Polarity
Band
(Anode+)
MARKING
E, V CASE
FEATURES
• Conductive polymer electrode,
multianode design
• Benign failure mode under
recommended use conditions
• Extremely Low ESR
• 3x reflow 260°C compatible
• Volumetric efficiency
• High frequency capacitance retention
APPLICATIONS
• Telecommunication routers
• Basestations with high power DC/DCs
NOTE: Conductive Polymer Capacitors are designed to operate within the limits of the environmental conditions specified for each series. If operated continuously
at their maximum temperature and / or humidity limit, or beyond these limits, capacitors may exhibit a parametric shift in capacitance and increases in ESR. These
changes may occur earlier if the specified environmental conditions are exceeded. Similarly, their normal operational time period will be significantly extended if their
general duty cycle includes operation below maximum temperature within humidity controlled environments. Careful attention should be paid to maximum tempera-
ture with associated high humidity environments as well as voltage derating, ripple current and current surges. Please reference the AVX Conductive Polymer
Capacitor Guidelines for more information or contact factory for application assistance.
LEAD-FREE COMPATIBLE
COMPONENT
SnPb termination option is not
RoHS compliant.
117
102616
TCM Series
Conductive Polymer Solid Electrolytic Chip Multianode Capacitors
Capacitance Rated Voltage DC (V
R
) to 85°C
μF Code 2.5V (e) 4V (G) 6.3V (J) 10V (A) 35V (V) 100V (A)
10 106 V(50)
22 226 E(25)
33 336
47 476
68 686
100 107
150 157
220 227
330 337 E(10,15) E(10,15)
470 477 E(7,10)
680 687 E(12) E(12)
1000 108 E(6,10) E(6,8,10,12)
CAPACITANCE AND RATED VOLTAGE RANGE
(LETTER DENOTES CASE SIZE)
Available Ratings, (ESR ratings in mOhms in brackets)
Engineering samples - please contact manufacturer
Note: Voltage ratings are minimum values. AVX reserves the right to supply higher ratings in the same case size, to the same reliability standards.
RATINGS & PART NUMBER REFERENCE
Moisture Sensitivity Level (MSL) is defined according to J-STD-020.
All technical data relates to an ambient temperature of +25ºC. Capacitance and
DF are measured at 120Hz, 0.5RMS with DC bias of 2.2 volts. DCL is measured
at rated voltage after 5 minutes.
ESR allowed to move up to 1.25 times catalog limit post mounting.
For typical weight and composition see page 223.
NOTE: AVX reserves the right to supply a higher voltage rating or tighter
tolerance part in the same case size, to the same reliability
standards.
Rated
Maximum
DCL DF
ESR
AVX Case Capacitance
Voltage
Operating
Max. Max.
Max.
MSL
100kHz RMS Current (mA)
Part No. Size (μF)
(V)
Temperature
(μA) (%)
@ 100kHz
45ºC 85ºC 105ºC
(ºC) (mΩ)
2.5 Volt @ 85°C
TCME108M002#0006 E 1000 2.5 105 250 10 6 3 8300 5800 3700
TCME108M002#0010 E 1000 2.5 105 250 10 10 3 6400 4500 2900
4 Volt @ 85°C
TCME687M004#0012 E 680 4 105 272 8 12 3 5800 4100 2600
TCME108M004#0006 E 1000 4 105 400 8 6 3 8300 5800 3700
TCME108M004#0008 E 1000 4 105 400 8 8 3 7200 5000 3200
TCME108M004#0010 E 1000 4 105 400 8 10 3 6400 4500 2900
TCME108M004#0012 E 1000 4 105 400 8 12 3 5800 4100 2600
6.3 Volt @ 85°C
TCME337M006#0010 E 330 6.3 105 198 8 10 3 6400 4500 2900
TCME337M006#0015 E 330 6.3 105 198 8 15 3 5200 3600 2300
TCME477M006#0007 E 470 6.3 105 296 10 7 3 7700 5400 3500
TCME477M006#0010 E 470 6.3 105 296 10 10 3 6400 4500 2900
TCME687M006#0012 E 680 6.3 105 408 8 12 3 5800 4100 2600
10 Volt @ 85°C
TCME337M010#0010 E 330 10 105 330 8 10 3 6400 4500 2900
TCME337M010#0015 E 330 10 105 330 8 15 3 5200 3600 2300
35 Volt @ 85°C
TCME226M035#0025 E 22 35 105 77 8 25 3 4000 2800 1800
100 Volt @ 85°C
TCMV106M100#0050 V 10 100 105 100 8 50 3 2900 2000 1300
RECOMMENDED DERATING FACTOR
Voltage and temperature derating as percentage of Vr
100%
95%
90%
85%
80%
75%
70%
65%
60%
55%
50%
-55ºC 85ºC 105ºC
Rated Voltage
Recommended Application
Voltage for Vr ≤ 10V
Recommended Application
Voltage for Vr ≥ 16V
80%
72%
64%
118
102616
TCM Series
Conductive Polymer Solid Electrolytic Chip Multianode Capacitors
PRODUCT CATEGORY 105°C
TEST Condition Characteristics
Visual examination no visible damage
DCL 1.25 x initial limit
Endurance ΔC/C within ±20% of initial value
DF 1.5 x initial limit
ESR 2 x initial limit
Visual examination no visible damage
DCL (V
R
≤ 75V) 1.25 x initial limit
DCL (V
R
> 75V) 2 x initial limit
Storage Life
105ºC, 0V, 2000h
ΔC/C within ±20% of initial value
DF 1.5 x initial limit
ESR 2 x initial limit
Visual examination no visible damage
DCL 3 x initial limit
Humidity ΔC/C within +30/-20% of initial value
DF 1.5 x initial limit
ESR 2 x initial limit
+20ºC -55ºC +20ºC +85ºC +105ºC +20ºC
Temperature DCL
IL* n/a IL* 10 x IL* 12.5 x IL* IL*
Stability ΔC/C
n/a +0/-20% ±10% +20/-0% +30/-0% ±10%
DF
IL* 1.5 x IL* IL* 1.5 x IL* 2 x IL* IL*
Visual examination no visible damage
Surge
DCL initial limit
Voltage
ΔC/C
within +10/-20% of initial value for Vr ≤ 10V
within +20/-30% of initial value for Vr ≥ 16V
DF 1.25 x initial limit
Determine after application of rated voltage for 2000
+48/-0 hours at 85±2ºC and then leaving 1-2 hours at
room temperature. Also determine after application of
105ºC temperature, category voltage for 2000 +48/-0
hours and then leaving 1-2 hours at room tempera-
ture. Power supply impedance to be ≤0.1Ω/V.
Determine after storage without applied voltage
at 65±2ºC and 95±2% relative humidity for 500
hours and then recovery 1-2 hours at room
temperature.
Test temperature: 105ºC+3/0ºC
Test voltage: Category voltage at 105ºC
Surge voltage: 1.3 x category voltage at 105ºC
Series protection resistance 1000±100Ω
Discharge resistance: 1000Ω
Number of cycles: 1000x
Cycle duration: 6 min; 30 sec charge,
5 min 30 sec discharge
Step Temperature°C Duration(min)
1 +20±2 15
2 -55+0/-3 15
3 +20±2 15
4 +85+3/-0 15
5 +105+3/-0 15
6 +20±2 15
*Initial Limit Initial measurement max. 1hr after the removal from dry pack or after pretreatment at 85°C for 24 hours.
P1-P3

TCME108M004R0010

Mfr. #:
Buy TCME108M004R0010
Manufacturer:
N/A
Description:
Tantalum Capacitors - Polymer SMD 4volts 1000uF 20%
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet