20mm Coin Cell Breakout Board (CR2032)
PRODUCT ID: 1870
Description
Simple but effective - this sewable breakout board has a CR2032 coin cell battery holder soldered on and
0.1" pitch breakout pins for easy connecting. Great for powering very low-current projects, or adding a
battery backup circuit to a real-time-clock or similar.
Comes with one fully assembled and tested coin cell battery holder and a small stick of 0.1" header so you
can solder it on and plug into a breadboard. Coin cell battery is not included.
We also have a version with an on/off switch.
Technical Details
Dimensions:
o 23.5mm x 28mm x 1.6mm / 0.9" x 1.1" x 0.06"
o Mounting hole distance: 18mm x 22mm / 0.7" x 0.9"
o Weight: 3g
EngineeredinNYCAdafruit®
