Bosch Connected Devices and Solutions GmbH | Datasheet
Transport Data Logger | TDL110
Transparency for your Supply Chain
By being attached to the shipment and measuring and recording relevant parameters like temperature,
humidity, tilt, and shock, the TDL makes the delivery process of goods visible and traceable. These
measurements are then documented and visualized through a mobile application. Since the limits of
each parameter can be individually configured, any transgression of these limits is traceable and clearly
assignable to the stations throughout the entire supply chain.
APPLICATION ADVANTAGES
▶ Creates transparency within the entire
supply chain
▶ Simplified configuration and visualization via
mobile application
▶ Battery with a long lifetime resulting in less
handling effort
MEASUREMENT PARAMETERS
DEVICE SPECIFICATION
▶ Dimension (L x W x H) 101.8 mm x 91 mm x 25 mm
▶ Weight 100 g
▶ Power supply CR 123A Lithium Battery, 1400 mAh
▶ Battery lifetime 2 Years (10 min. measuring cycle, +25 °C)
▶ Enclosure protection class IP 54
▶ Electrical protection class III
▶ Measuring interval 1 min … 4 hours (selectable)
▶ Memory capacity 2 Years (15 min. measuring cycle, typical usage)
▶ Certification CE, FCC, ISED, SRRC, MIC, SIRIM, IMDA, ACMA, NTC, NBTC |
further on request
Shock Humidity Temperature
PART NO | 0 273 600 024 001
OPERATING CONDITIONS
▶ Operating temperature range -25 °C … +80 °C
▶ Storage temperature range 0 °C … +40 °C
▶ Humidity range 0 % rH … 100 % rH (non condensing)
▶ Shock / Acceleration range ±8 g per axis
±13.8 g three-dimensional
Tilt