1/20October 2004
VNQ810-E
QUAD CHANNEL HIGH SIDE DRIVER
Rev. 1
Table 1. General Features
(*) Per each channel
■
CMOS COMPATIBLE INPUTS
■ OPEN DRAIN STATUS OUTPUTS
■ ON STATE OPEN LOAD DETECTION
■ OFF STATE OPEN LOAD DETECTION
■ SHORTED LOAD PROTECTION
■ UNDERVOLTAGE AND OVERVOLTAGE
SHUTDOWN
■ PROTECTION AGAINST LOSS OF GROUND
■ VERY LOW STAND-BY CURRENT
■ REVERSE BATTERY PROTECTION (**)
■ IN COMPLIANCE WITH THE 2002/95/EC
EUROPEAN DIRECTIVE
DESCRIPTION
The VNQ810-E is a quad HSD formed by
assembling two VND810-E chips in the same SO-
28 package. The VNQ810-E is a monolithic device
made by using STMicroelectronics VIPower M0-3
Technology, intended for driving any kind of load
with one side connected to ground. Active V
CC
pin
voltage clamp protects the device against low
energy spikes (see ISO7637 transient
compatibility table).
Figure 1. Package
Active current limitation combined with thermal
shutdown and automatic restart protects the
device against overload. The device detects open
load condition both in on and off state. Output
shorted to V
CC
is detected in the off state. Device
automatically turns off in case of ground pin
disconnection.
Table 2. Order Codes
Note: (**) See application schematic at page 9
Type R
DS(on)
I
out
V
CC
VNQ810-E 160m
Ω (*) 3.5A (*) 36V
SO-28 (DOUBLE ISLAND)
Package Tube Tape and Reel
SO-28
VNQ810-E VNQ810TR-E
Obsolete Product(s) - Obsolete Product(s)
