T
DO NOT
SCALE FROM
THIS PRINT
.250 6.35
REF
2
MAX SWAY
(EITHER DIRECTION)
"A"
"A"
IPT1-50-D
.200 5.08
REF
((No OF POS x .1000 [2.540])
+ .0200[.508])
.010[.25]
.025
SQ
0.64
REF
(No OF POS -1) X .1000[2.540]
.060 1.52
.100 2.54
2
MAX SWAY
(EITHER DIRECTION)
01
02
SEE NOTE 8
C
L
T
IPT1-1XX-XX-XX-D-RA-XX
No OF POS PER ROW
-02 THRU -25
ROW SPECIFICATION
(SEE NOTE 12)
-D: DOUBLE (USE IPT1-XX-D)
PLATING SPECIFICATION
LEAD STYLE
-01
OPTION
(SEE NOTE 13)
-PL: POSITION #1 REMOVED
(USE IPT1-XX-D-P)
-FL: FRICTION LOCK [POS -05 THRU -25]
(USE IPT1-XX-D-FL-X & T-1S64-XX-X)
(FOR -FL-POL OPTION COMBINATION
USE IPTI-XX-D-FL-P & T-1S64-XX-X)
-RA: RIGHT ANGLE
TAIL OPTION
-S: SELECTIVE GOLD, 30 Au / 50 Ni MIN ON
CONTACT, MATTE TIN TAIL
-H: HEAVY GOLD, 30 Au / 50 Ni MIN ON
CONTACT, 3 Au / 50 Ni MIN ON TAIL
-L: LIGHT SELECTIVE GOLD, 10 Au / 50 Ni MIN
ON CONTACT, MATTE TIN TAIL
-SM: SELECTIVE HEAVY GOLD, 30 Au / 50 Ni MIN
ON CONTACT, MATTE TIN TAIL
.155 3.94
REF
90°
.09 2.3
.100 2.54
.06 1.5
SECTION "A"-"A"
T-1S6-07-X-2
T-1S6-15-X-2
C1
C2
19
20
01
02
IPT1-110-01-X-D-RA-PL SHOWN
-PL: POLARIZED OPTION
IPT1-XX-D-P
-FL: FRICTION LOCK OPTION
IPT1-110-01-X-D-RA-FL SHOWN
IPT1-XX-D-FL-X
T-1S64-04-X
T-1S64-03-X
.180
±.005
4.57
±0.13
IN-PROCESS 1
T-1S6-07-X-2
90°
.380
±.005
9.65
±0.13
IN-PROCESS 2
T-1S6-07-X-2
T-1S6-15-X-2
C1
PACKAGING VIEW
TUBE: PT-1-24-02-75
PLUG: TP-07
C
(SEE NOTES 10 & 11)
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01[.3]
2
.XXX:
.005[.13]
.XXXX:
.0020[.051]
MATERIAL:
.100 DOUBLE ROW SHROUDED TERMINAL ASSEMBLY
BY:
IPT1-1XX-XX-XX-D-RA-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
DEAN P
11-05-2002
1
1
SHEET SCALE: 2:1
INSULATOR: LCP, UL 94 VO, COLOR: BLACK
CONTACT: PHOS BRONZE, 510, 3/4 HARD
c:\enterprisevault\DWG\MISC\MKTG\IPT1-1XX-XX-XX-D-RA-XX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. MAXIMUM ALLOWABLE CUT FLASH: .010[.25].
3. MINIMUM TERMINALT PUSH OUT FORCE: 2 lbs.
4. MAXIMUM VARIATION BETWEEN PIN ROWS: .005[.13].
5. "END WALLS" AFTER CUTTING SHOULD BE .015+/-.003[.38+/-.08].
6. NOTE DELETED.
7. ALL DIMENSIONS TO BE ABOUT CENTERLINE WITHIN +/-.005[.13].
8. PRESENCE OF VOIDS IS OPTIONAL AND PATTERN TO WHICH THEY
OCCUR IS VARIABLE.
9. -T PLATING OPTION AVAILABLE FOR EXISTING CUSTOMERS ONLY.
10. NOTE DELETED.
11. SAMTEC LOGO INDICATES THE FIRST ROW TO BE FILLED FOR -RA
APPLICATION.
12. STANDARD BODIES CAN BE CUT TO POSITION.
FOR OPTIONS -PL & -FL, BODIES MUST BE MOLDED TO POSITION.
13. FOR EXISTING CUSTOMERS ONLY, -POL CAN BE SUBSTITUED FOR -PL.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
REVISION T
