3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Pak 50 Plug
.050″ Straight and Right Angle Plug, with Power Ground Pin P50 Series
Physical
Electrical
Environmental
*"RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration
values in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury,
hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated in
writing by 3M, this information represents 3M's knowledge and belief based on information provided by third party suppliers to 3M.
Insulation
Material:
Glass Filled Nylon
Flammability:
UL 94V-0
Color:
Black
Contact
Material:
Phosphor Bronze
Plating
Underplating:
Nickel
Wiping Area:
10µ" [.25 µm] Gold
Solder Tails:
Tin Alloy over Nickel or Gold Flash (RoHS compliant)(see ordering information)
Retainer Clips:
Tin Lead or Tin-Copper (RoHS compliant)
Current Rating:
0.5 A per Signal Contact, 2 A per Power Contact
Insulation Resistance:
10
3
MΩ min. at 500 V DC
Withstanding Voltage:
650 VAC for 1 minute
Temperature Rating:
-55°C to +85°C
Process Rating:
260°C (per J-STD-020C)
TS-2051-03
Sheet 1 of 3
Date Modified: May 15, 2006
• Power/ground contacts enable separation of
power and signals
• EMLB power/ground contacts control static
discharge and allow “hot board” replacement
• 2 amp power/ground contact rating for high
current applications maximizes signal contact
utilization
• RoHS compliant* version (EA plating suffix)
available
