2902042 Datasheet 2902042 | P1-P3

https://www.phoenixcontact.com/pi/products/2902042

08/19/2018Page1/6

Signal conditioner-MINI MCR-2-U-U-2902042

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's

documentation. Our General Terms of Use for Downloads are valid

(http://phoenixcontact.com/download)

3-way signal conditioner with plug-in connection technology for the electrical isolation of unipolar and bipolar

analog signals. Input signal: 0 ... 10 V/±10 V, output signal: 0 ... 10 V/±10 V, screw connection technology

Product Description

Standard signal 3-way signal conditioner with plug-in connection technology for the electrical isolation, conversion, amplification, and filtering of

standard voltage signals. The measuring transducer supports fault monitoring and NFC communication.

Key Commercial Data

Packing unit 1 STK

GTIN

GTIN 4046356652070

Technical data

Note

Utilization restriction

EMC: class A product, see manufacturer's declaration in the download

area

Dimensions

Width 6.2 mm

Height 110.5 mm

Depth 120.5 mm

Ambient conditions

Ambient temperature (operation) -40 °C ... 70 °C

Ambient temperature (storage/transport) -40 °C ... 85 °C

Input data

Number of inputs 1

Configurable/programmable no

Voltage input signal 0 V ... 10 V

https://www.phoenixcontact.com/pi/products/2902042

08/19/2018Page2/6

Signal conditioner-MINI MCR-2-U-U-2902042

Technical data

Input data

-10 V ... 10 V

2 V ... 10 V

Input resistance of voltage input approx. 1 MΩ

Input resistance current input approx. 63 Ω (+ 0.7 V for test diode)

Output data

Number of outputs 1

Configurable/programmable no

Voltage output signal 0 V ... 10 V

-10 V ... 10 V

Max. output voltage 11 V

Short-circuit current < 15 mA

Load/output load voltage output ≥ 10 kΩ

Ripple

< 20 mV

(at 10 kΩ)

Transmission Behavior 1:1 to input signal

Power supply

Nominal supply voltage 24 V DC

Supply voltage range

9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2

1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the

supply voltage. It can be snapped onto a 35 mm DIN rail according to

EN60715))

Typical current consumption 25 mA (24 V DC)

54 mA (12 V DC)

Power consumption ≤ 200 mW (at 9.6 V DC)

Connection data

Connection method Screw connection

Single conductor/terminal point, solid, with ferrule, min. 0.2 mm²

Single conductor/terminal point, solid, with ferrule, max. 1.5 mm²

Single conductor/terminal point, solid, without ferrule, min. 0.2 mm²

Single conductor/terminal point, solid, without ferrule, max. 2.5 mm²

Conductor cross section flexible min. 0.2 mm²

Conductor cross section flexible max. 1.5 mm²

Min. AWG conductor cross section, flexible 24

Max. AWG conductor cross section, flexible 12

Stripping length 10 mm

Screw thread M3

General

No. of channels 1

Maximum transmission error 0.1 % (of final value)

Maximum temperature coefficient 0.01 %/K

Temperature coefficient, typical 0.01 %/K

https://www.phoenixcontact.com/pi/products/2902042

08/19/2018Page3/6

Signal conditioner-MINI MCR-2-U-U-2902042

Technical data

General

Limit frequency (3 dB) approx. 30 Hz

Step response (10-90%) approx. 10 ms

Protective circuit Transient protection

Electrical isolation Reinforced insulation in accordance with IEC 61010-1

Overvoltage category II

Degree of pollution 2

Rated insulation voltage 300 V (effective)

Test voltage, input/output/supply 3 kV (50 Hz, 1 min.)

Electromagnetic compatibility Conformance with EMC directive

Noise emission EN 61000-6-4

Noise immunity

EN 61000-6-2 When being exposed to interference, there may be

minimal deviations.

Color gray

Housing material PBT

Mounting position any

Assembly instructions

The T connector can be used to bridge the supply voltage. It can be

snapped onto a 35 mm DIN rail according to EN 60715.

Conformance CE-compliant

ATEX  II 3 G Ex nA IIC T4 Gc X

UL, USA/Canada UL 508 Listed

Class I, Div. 2, Groups A, B, C, D T6

Class I, Zone 2, Group IIC T6

Certificate of classification DNV GL 14445-15HH

Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2

Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2

Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2

EMC data

Designation Electromagnetic RF field

Standards/regulations EN 61000-4-3

Designation Fast transients (burst)

Standards/regulations EN 61000-4-4

Designation Conducted interferences

Standards/regulations EN61000-4-6

Standards and Regulations

Electromagnetic compatibility Conformance with EMC directive

Noise emission EN 61000-6-4

Standards/regulations EN 61000-4-2

Designation Electromagnetic RF field

Standards/regulations EN 61000-4-3

EN 61000-4-4

P1-P3 P4-P6

2902042

Mfr. #:

Buy 2902042

Manufacturer:

Phoenix Contact

Description:

Terminal Block Interface Modules MINI MCR-2-U-U

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

2902042