OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

N40P107

P1-P3P4-P6P7-P8
EasyPoint
TM
N40P107
Single Module (without IC, with push button)
www.ams.com Revision 1.6 1 - 8
1 General Description
EasyPoint™ N40P107 is a miniature joystick module concept based
on contact-less, magnetic movement detection. The two-dimensional
linear encoder IC AS5013 is mounted on the bottom side of the
application’s PCB, and monitors the movement of the magnet
incorporated into the knob and provides directly the x and y
coordinates via I²C output. An integrated mechanical push button
built in the module provides a “select” function.
Figure 1. N40P107-xxxxx-H
2 Key Features
Small form factor
Lateral magnet movement radius up to ±1mm
Direct knob force feedback
Push button output
SMD mounting
3 Applications
The EasyPoint™ N40P107 in combination with the AS5013 is ideal
for small form factor navigation user interfaces in battery driven
portable devices, such as - Mobile phones (especially for gaming),
Remote Controls, Gaming Consoles, Analog joysticks(360 degree),
MP3 players, PDAs, PND, MID and GPS
4 Benefits
High reliability due to magnetic contact-less sensing
Easy to use and fast integration
Figure 2. Typical Application Diagram
EP
TM
module footprint
Main Board (PCB)
AS5013 (IC)
N40P107
www.ams.com Revision 1.6 2 - 8
EasyPoint
TM
N40P107
Datasheet - Electrical Characteristics
5 Electrical Characteristics
5.1 Mechanical Specifications
5.2 Electrical Specifications
5.3 Environmental Specifications
Table 1. Mechanical Specifications
Parameter Note
Number of operating shafts
Single shaft
Shaft material
LPC
Housing material
LPC & PA46
Shell material
Stainless Steel or Copper alloy
Travel (XY operation)
±1.00mm (±10%)
Travel (Z push operation)
0.22mm (±0.05mm)
Directional operating force (XY direction)
0.35N (±0.10N) or 0.55N (±0.15N)
Push operating force (Z direction)
1.80N (±15%)
Vibration
10-500-10Hz 15 minutes, 12 cycles, 3 axes (total 36 cycles)
Operating life – XY direction
Each direction > 1 million cycles
Operating life – Push Z direction
> 1 million cycles
Shaft strength (XYZ direction)
> 5.0kgf
Over force
1.5kgf > 100k cycles
Table 2. Electrical Specifications
Parameter Min Max Unit Note
Contact resistance
500 mΩ Norm: EIA-364-23
Dielectric withstanding voltage
100 Vac Norm: EIA-364-20
Insulation resistance
100 MΩ Norm: EIA-364-21, 100Vdc
Bouncing (On/Off)
5 ms Rate: 2 times/sec.
Table 3. Environmental Specifications
Parameter Note
Operating temperature range
-20 ~ +70ºC
Storage temperature range
-40 ~ +85ºC
Humidity non-condensing 5 ~ 85% RH
Degrees of protection
IP 5X
www.ams.com Revision 1.6 3 - 8
EasyPoint
TM
N40P107
Datasheet - Electrical Characteristics
5.4 Recommended Reflow Temperature Profile
Figure 3. Reflow Temperature Profile
Notes:
1. Do not wash the module! Do not use flux cleaner or solder paste remover!
2. Maximum 3 passes through reflow oven.
217ºC
170ºC
140ºC
250 ~ 260°C
60 sec. MAX.
60 ~ 120 sec.
Pre-Heating
Soldering Time
P1-P3P4-P6P7-P8

N40P107

Mfr. #:
Buy N40P107
Manufacturer:
ams
Description:
Input Devices Single module (w/o IC, w/ push button)
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet