THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
*
*
DO NOT
SCALE FROM
THIS PRINT
.031
x .016 [.41] REF (TYP)
0.79
.335
REF
8.51
.195
REF
4.95
03 01
04 02
.31 7.87
(SEE NOTE 7)
90.0°
-
2°
+
3°
.05 1.27
(SEE NOTE 9)
C
L
R .025 [.64] (TYP)
C
C
-D: DOUBLE ROW
.004 [0.10]
.05 1.27
(SEE NOTE 9)
.203
±.010
5.16
±0.25
90.0°
-
2°
+
3°
C
L
C
C
R .025 [.64] (TYP)
.004 [0.10]
(SEE NOTE 12)
((NO OF POS X .10 [2.5]) + .02 [0.5]
.095
2.41
REF
.060
REF
1.52
01
02
03
-S: SINGLE ROW
-D: DOUBLE ROW
SSW-1XX-22-XXX-X-VS-XX-X-XX
No OF POSITIONS
-02 THRU -50
-S: SINGLE (USE SSW-XX-S, SEE FIG 1)
-D: DOUBLE (USE SSW-XX-D, SEE FIG 1)
-T: TRIPLE (USE SSW-XX-T, SEE FIG 2 & 3)
OPTION
-P: PICK AND PLACE (5 POS MIN)
(SEE FIG 5, SHT 3)
(USE LMP-02 FOR -D OPTION)
(USE PPP-12 FOR -S OPTION)
-K: PAD (3 POS MIN)
(SEE FIG 6, SHT 3)
INDICATE POS (SEE FIG 4, SHT 2)
POLARIZING OPTION
LEAD STYLE
-G: GOLD, 20µ" Au / 50µ" Ni MIN ON CONTACT,
3µ" AU / 50µ" Ni MIN ON TAIL
-S: SELECTIVE, 30µ" Au / 50µ" Ni MIN ON CONTACT, MATTE TIN TAIL
-H: HEAVY GOLD 30µ" Au / 50µ" Ni MIN
ON CONTACT, 3µ" Au / 50µ" Ni MIN ON TAIL
-F: FLASH SELECTIVE, 3µ" Au / 50µ" Ni MIN ON CONTACT, MATTE TIN TAIL
-STL: SELECTIVE, 30µ" Au / 50µ" Ni MIN
ON CONTACT AREA, TIN /LEAD (90/10 +/-5%) TAIL
-SM: SELECTIVE, 30µ" Au / 50µ" Ni MIN ON CONTACT, MATTE TIN TAIL
-FM: FLASH SELECTIVE, 3µ" Au / 50µ" Ni MIN ON CONTACT,
MATTE TIN TAIL (-VS OPTION ONLY)
-L: LIGHT SELECTIVE, 10µ" Au / 50µ" Ni MIN
ON CONTACT AREA, MATTE TIN TAIL
OPTION
-VS: VERTICAL SURFACE MOUNT (SEE FIG 1)
OPTION
-TR: TAPE & REEL
(AVAILABLE FOR POSITIONS -02
THRU -28, -VS OPTION ONLY
PLATING SPECIFICATIONS
BODY SPECIFICATION
-N: NOTCH (SEE FIG 7, SHT 4, POSITIONS 05, 07,
08, 10, 12, 13, 15, 17, 20, 25, 32, 36 ONLY)
(ONLY AVAILABLE IN -D ROW, -VS OPTION)
(USE NSW-XX-D-N-XX BODY, SEE TABLE 2)
(NOT AVAILABLE WITH THE -P OPTION)
(NOT AVAILABLE FOR ALL POSITIONS
ON SINGLE ROW WITH (-P) OPTION)
(SEE FIG 8, SHT 2)
-22 (USE C-17-02-X)
.190 4.83
IN-PROCESS
DOUBLE ROW
.190 4.83
IN-PROCESS
SINGLE ROW
-S: SINGLE ROW
FIG 1
-VS: VERTICAL SURFACE MOUNT
C
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01 [0.3] 2
.XXX:
.005 [0.13]
.XXXX:
.0020 [0.051]
MATERIAL:
.100 [2.54] SURFACE MOUNT ASSEMBLY
BY:
SSW-1XX-22-XXX-X-VS-XX-X-XX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
PLUMMER 01/20/97
4
1
SHEET SCALE: 2:1
INSULATOR: SINGLE & DOUBLE ROW: LCP, UL 94 VO
TRIPLE ROW: PCT, UL 94 VO
COLOR: BLACK
TERMINAL: PHOSPHOR BRONZE
F:\DWG\MISC\MKTG\SSW-1XX-22-XXX-X-VS-XX-X-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
NOTES:
1. REPRESENTS A CONTROL PLAN CRITICAL DIMENSION.
2. MAXIMUM CUT FLASH: .015[.38] WITH NO FLASH BELOW STANDOFFS OR IN CONTACT HOLES.
3. MAXIMUM ALLOWABLE BOW: .003[.08] INCH/INCH.
4. MAXIMUM ALLOWABLE SWAY: 2° EITHER DIRECTION.
5. MAXIMUM ALLOWABLE VARIATION BETWEEN ROWS: .010[.25].
6. "END WALLS" AFTER CUTTING SHOULD BE .020±.003 [.51±.08].
7. SHEAR TAILS TO DIMENSION SHOWN, BURR ALLOWED ON TOP SIDE (MOLD SIDE) TO .005 [.13] MAX
8. POSITIONS -05 THROUGH -50 TO BE PACKAGED INTUBES;
POSITIONS -02 THROUGH -04 TO BE LAYER PACKAGED.
9. MEASURED AT BEND RADIUS, NOT AT END OF PIN.
10. MINIMUM CONTACT PUSHOUT FORCE: 1.5 lbs.
11. POLARIZED CORNER OF PPP-12 IS TO BE ORIENTED TOWARD POSITION 1.
12. SINGLE ROW SURFACE MOUNT PARTS: FOR ODD POSITIONS, LOSE ONE POSITION PER CUT,
FOR EVEN POSITIONS, LOSE TWO POSITIONS PER CUT.
REVISION AZ
