308 Constitution Drive
Menlo Park, CA 94025-1164
Phone: 800-227-4856
www.circuitprotection.com
ESD Protector
Overvoltage Protection Device
Raychem Circuit Protection Products
PRODUCT: PESD0402-060
DOCUMENT: SCD 26105
REV LETTER: I
REV DATE: DECEMBER 7, 2007
PAGE NO.: 8 OF 8
POST REFLOW, CLEANING CONDITIONS
A 5% saponofier combined with water during wash.
For Ultrasonic process water temperature should be at 50°C and board should be submerged for a minimum of
one minute in the solutions, then rinse and dry.
For in-line washing, the temperature of the water sprayed should be at 110°C, rinse and drying is done in-line.
Warning: Application Limitations for PESD0402-060. This part is not intended to be used
under bias, nor for power bus nor data line applications. It is only to be used in RF
applications. Users should independently evaluate the suitability of and test each product
selected for their own applications
Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test
each product selected for their own applications. Tyco Electronics reserves the right to change or update, without notice, any
information contained in this publication; to change, without notice, the design, construction, processing, or specification of any
product; and to discontinue or limit production or distribution of any product. This publication supersedes and replaces all information
previously supplied. Without expressed or written consent by an officer of Tyco Electronics, Tyco Electronics does not authorize the
use of any of its products as components in nuclear facility applications, aerospace, or in critical life support devices or systems. Tyco
Electronics expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any
implied warranties of merchantability or fitness for a particular purpose. Tyco Electronics’ only obligations are those in the Tyco
Electronics Standard Terms and Conditions of Sale and in no case will Tyco Electronics be liable for any incidental, indirect, or
consequential damages arising from the sale, resale, use, or misuse of its products.
© 2004, 2007 Tyco Electronics Corporation. All rights reserved.
