HDMI over Cat5/Cat6 Active Extender, Wallplate
Remote Receiver for Video and Audio, 1080p
@60Hz up to 150-ft., TAA
MODEL NUMBER: B126-1A0-WP-1
Works with Tripp Lite’s B126-Series transmitters to extend an HDMI signal via Cat5e/6 cable to a
projector, monitor or television. Ideal for digital signs, schools and trade show presentations.
Description
The B126-1A0-WP-1 HDMI over Cat5/Cat6 Active Remote Receiver works with Tripp Lite’s B126-002 or
B126-004 transmitter to extend an HDMI signal to a projector, monitor or television. It’s ideal for digital
signs, trade shows, presentations, classrooms, churches, retail settings and other applications where the
video source is located farther than conventional cables allow or that require multiple displays connected
to one source.
The receiver uses HDMI cable (see Tripp Lite’s P568-Series) to connect to the monitor and Cat5e/6 cable
to receive the signal from the transmitter or a remote repeater in the chain (for best results, use 24 AWG
solid-wire Cat5e/6 cable, such as Tripp Lite’s N202-Series). No 110 punchdown connection is required.
The B126-1A0-WP-1 can extend a 1080i (60 Hz) signal up to 200 feet, a 1080p (60 Hz) signal up to 150
feet and a 3D signal up to 125 feet. You can connect up to three B126-110 remote repeaters in the chain
for a total of four HDMI displays and full signal extension of 700 feet (1080i), 500 feet (1080p) or 400 feet
(3D).
In addition to crystal-clear video, the B126-1A0-WP-1 delivers full, rich stereo and 7.1-channel surround
sound (multi-channel or PCM) audio when paired with a B126-002 or B126-004 transmitter. Built-in
equalization control lets you fine-tune the image quality at each remote display. Supports 24-bit True
Color (8 bits per channel) and HDCP compatibility. Easy to set up with no software or drivers to install.
Mounts to a wall using the included hardware.
Features
Highlights
Supports high-definition video
resolutions up to 1080p (60 Hz)
●
Supports stereo and 7.1-
channel surround sound audio
●
Works with all operating
systems and HDMI video
sources
●
Plug and play—no software or
drivers to install
●
Built-in equalization control lets
you adjust monitor image
●
System Requirements
For international use, a power
supply with the appropriate plug
type must be purchased
separately.
●
Package Includes
B126-1A0-WP-1 HDMI over
Cat5/Cat6 Active Remote
Receiver
●
Screwdriver for adjusting
equalization
●
External Power Supply with
NEMA 1-15P Plug(Input:
100–240V, 50/60 Hz, 0.5A;
Output: 5V, 2A, 5 ft.)
●
Mounting hardware
●
Owner’s Manual
●
1 / 3