OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

DS1135Z-10+

P1-P3P4-P6P7-P7
DS1135
4 of 7
ABSOLUTE MAXIMUM RATINGS
Voltage Range on Any Pin Relative to Ground -1.0V to +6.0V
Short Circuit Output Current 50mA for 1 second
Operating Temperature -40°C to +85°C
Storage Temperature -55°C to +125°C
Lead Temperature (soldering, 10 seconds) +300°C
Soldering Temperature (reflow) +260°C
This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the
operation sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods of
time may affect reliability.
DC ELECTRICAL CHARACTERISTICS
(V
CC
= +5V ±5%, T
A
= -40°C to +85°C, unless otherwise noted.)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS NOTES
Supply Voltage
V
CC
4.75
5.00
5.25
V
1
Active Current I
CC
V
CC
= 5.25V,
period = 1µs
35 mA
High Level Input Voltage V
IH
2.2
V
CC
+0.5
V 1
Low Level Input Voltage
V
IL
-0.5
0.8
V
1
Input Leakage
I
L
0V ≤ V
I
≤ V
CC
-1.0
+1.0
µA
High Level Output
Current
I
CC
V
CC
= 4.75V,
V
OH
= 4V
-1.0 mA 1
Low Level Output Current I
CC
V
CC
= 4.75V,
V
OL
= 0.5V
12 mA 1
AC ELECTRICAL CHARACTERISTICS
(V
CC
= +5V ±5%, T
A
= -40°C to +85°C, unless otherwise noted.)
PARAMETER SYMBOL MIN TYP MAX UNITS NOTES
Period
t
PERIOD
2 (t
WI
)
ns
2
Input Pulse Width t
WI
100% of
Tap Delay
ns 2
Input-to-Output Delay
t
PLH
, t
PHL
See Table 1
ns
Output Rise or Fall Time
t
OF
, t
OR
2.0
2.5
ns
Power-up Time
t
PU
100
ms
3
CAPACITANCE
(T
A
= +25°C, unless otherwise noted.)
PARAMETER SYMBOL MIN TYP MAX UNITS NOTES
Input Capacitance
C
IN
10
pF
DS1135
5 of 7
TEST CONDITIONS
Ambient Temperature: 25°C ± 3°C
Supply Voltage (V
CC
): 5.0V ± 0.1V
Input Pulse:
High: 3.0V ± 0.1V
Low: 0.0V ± 0.1V
Source Impedance: 50Ω Max.
Rise and Fall Time: 3.0ns Max. - Measured between 0.6V and 2.4V.
Pulse Width: 500ns
Pulse Period: 1µs
Output Load Capacitance: 15pF
Output: Each output is loaded with the equivalent of one 74F04 input gate.
Data is measured at the 1.5V level on the rising and falling edges.
Note: The above conditions are for test only and do not restrict the devices under other data sheet
conditions.
NOTES:
1. All voltages are referenced to ground.
2. Pulse width and duty cycle specifications may be exceeded; however, accuracy will be application
sensitive with respect to decoupling, layout, etc.
3. Power-up time is the time from the application of power to the time stable delays are being produced
at the output.
TIMING DIAGRAM
t
FALL
80%
t
RISE
20%
IN
OUT
1.5V
1.5V
t
WI
t
WI
PERIOD
1.5V
1.5V
1.5V
t
PLH
t
PHL
t
OF
t
OR
DS1135
6 of 7
TERMINOLOGY
Period: The time elapsed between the leading edge of the first pulse and the leading edge of the
following pulse.
t
WI
(Pulse Width): The elapsed time on the pulse between the 1.5-volt point on the leading edge and the
1.5-volt point on the trailing edge or the 1.5-volt point on the trailing edge and the 1.5-volt point on the
leading edge.
t
RISE
(Input Rise Time): The elapsed time between the 20% and the 80% point on the leading edge of the
input pulse.
t
FALL
(Input Fall Time): The elapsed time between the 80% and the 20% point on the trailing edge on the
input pulse.
t
PLH
(Time Delay, Rising): The elapsed time between the 1.5-volt point on the leading edge of the input
pulse and the 1.5-volt point on the leading edge of the output pulse.
t
PHL
(Time Delay, Falling): The elapsed time between the 1.5-volt point on the falling edge of the input
pulse and the 1.5-volt point on the falling edge of the output pulse.
ORDERING INFORMATION
PACKAGE INFORMATION
For the latest package outline information and land patterns (footprints), go to
www.maximintegrated.com/packages
. Note that a “+”, “#”, or “-” in the package code indicates RoHS status
only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of
RoHS status.
PACKAGE TYPE
PACKAGE CODE
OUTLINE NO.
LAND PATTERN NO.
8 SO S8+2
21-0041
90-0096
TIME DELAY (ns): 6, 8, 10, 12, 15, 20,
25, 30
PACKAGE TYPE:
Z = SOIC (150-MIL)
P1-P3P4-P6P7-P7

DS1135Z-10+

Mfr. #:
Buy DS1135Z-10+
Manufacturer:
Maxim Integrated
Description:
Delay Lines / Timing Elements 3-In-1 High-Speed Silicon Delay Line
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet