MP2000DJ-ADJ-LF-Z

MP2000
Low Input Voltage
150mA Linear Regulator
MP2000 Rev. 1.11 www.MonolithicPower.com 1
10/10/2011 MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2011 MPS. All Rights Reserved.
The Future of Analog IC Technology
DESCRIPTION
The MP2000 is a low-voltage, low-dropout
bipolar linear regulator. It operates from 1.35V
to 6.0V input voltage, and regulates the output
voltage from as low as 0.5V.
The MP2000 can supply up to 150mA of load
current. The MP2000 features thermal overload
and current limit protection. It is available in a
5-pin TSOT23-5 package.
Part Number Output Voltage
MP2000DJ-ADJ Adjustable
EVALUATION BOARD REFERENCE
Board Number Output* Dimensions
EV2000DJ-00A 1.2V 2.0”X x 2.0”Y x 0.4”Z
*
Default output voltage adjustable from 0.5V to 5.0V using an
external resistor divider.
FEATURES
Operates with V
IN
= 1.35V
Low 300mV Dropout at 150mA Output
±3% Accurate Output Voltage
Fixed and Adjustable Output Voltage Option
Better Than 0.001%/mA Load Regulation
Stable With Low-ESR Output Capacitor
Low 65μA Ground Current
Internal Thermal Protection
Current Limit Protection
7μA Typical Quiescent Current at Shutdown
APPLICATIONS
Low Current Regulators
Battery Powered Systems
Cellular Phones
“MPS” and “The Future of Analog IC Technology” are Trademarks of Monolithic
Power Systems, Inc.
TYPICAL APPLICATION
MP2000_TAC_S01
MP2000
FB
OUT
4
5
GND
2
EN
IN
3
1
OUTPUT
1.2V
V
IN
1.35V to 6V
V
IN
MP2000 – LOW INPUT VOLTAGE, 150mA LINEAR REGULATOR
MP2000 Rev. 1.11 www.MonolithicPower.com 2
10/10/2011 MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2011 MPS. All Rights Reserved.
ORDERING INFORMATION
Part Number* Package Top Marking Free Air Temperature (T
A
)
MP2000DJ-ADJ
TSOT23-5
G1
-40°C to +85°C
* For Tape & Reel, add suffix –Z (eg. MP2000DJ–ADJ–Z);
For RoHS compliant packaging, add suffix –LF (eg. MP2000DJ–ADJ–LF–Z)
PACKAGE REFERENCE
ABSOLUTE MAXIMUM RATINGS
(1)
IN Supply Voltage ........................-0.3V to +7.0V
FB Voltage ......................... -0.3V to V
OUT
+ 0.3V
EN Voltage ....................................... -0.7V to IN
Continuous Power Dissipation (T
A
= +25°C)
(2)
……………………………………………….0.57W
Junction Temperature...............................150°C
Lead Temperature ....................................260°C
Storage Temperature .............. -65°C to +150°C
Recommended Operating Conditions
(3)
Input Voltage.................................1.35V to 6.0V
Output Voltage...................................0.5V to 5V
Load Current...........................150mA Maximum
Operating Junct. Temp (T
J
)...... -40°C to +125°C
Thermal Resistance
(4)
θ
JA
θ
JC
TSOT23-5.............................. 220.... 110.. °C/W
Notes:
1) Exceeding these ratings may damage the device.
2) The maximum allowable power dissipation is a function of the
maximum junction temperature T
J
(MAX), the junction-to-
ambient thermal resistance θ
JA
, and the ambient temperature
T
A
. The maximum allowable continuous power dissipation at
any ambient temperature is calculated by P
D
(MAX)=(T
J
(MAX)-
T
A
)/ θ
JA
. Exceeding the maximum allowable power dissipation
will cause excessive die temperature, and the regulator will go
into thermal shutdown. Internal thermal shutdown circuitry
protects the device from permanent damage.
3) The device is not guaranteed to function outside of its
operating conditions.
4) Measured on JESD51-7 4-layer PCB.
TOP VIEW
MARKING
IN
GND
EN
1
2
3
5
4
OUT
FB
MP2000_PD01-TSOT23-5
MP2000 – LOW INPUT VOLTAGE, 150mA LINEAR REGULATOR
MP2000 Rev. 1.11 www.MonolithicPower.com 3
10/10/2011 MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2011 MPS. All Rights Reserved.
ELECTRICAL CHARACTERISTICS
V
IN
= 1.8V, T
A
= +25°C, unless otherwise noted.
Parameter Symbol Condition Min Typ Max Units
I
OUT
= 1mA 65 μA
Ground Pin Current
I
OUT
= 150mA 2.7 mA
Shutdown Current
EN = 1.0V, V
IN
= 5V
7 10 μA
FB Regulation Voltage 0.485 0.500 0.515 V
I
OUT
= 100mA 250
Dropout Voltage
(5)
I
OUT
= 150mA 300
mV
Line Regulation
I
OUT
= 1mA,
V
IN
= (V
OUT
+ 0.5V) to 6.0V
(7)
0.01 0.08 %/V
Load Regulation
I
OUT
= 1mA to 150mA,
V
IN
= V
OUT
+ 0.5V
(7)
0.001 0.02 %/mA
PSRR
V
IN
> V
OUT
+ 0.5V, C3 = 2.2μF,
V
IN
(AC) = 100mV, f = 1kHz
50 dB
Output Voltage Noise f = 1kHz, C
FB
> 0.1μF, I
OUT
= 1mA 300 nV/Hz
EN Input Low Voltage
0.7 V
EN Input Bias Current
EN = 0V
0.01 1 μA
Current Limit Protection V
OUT
= 1.2V 200 mA
Thermal Protection 145
°C
Thermal Protection
Hysteresis
30
°C
Notes:
5) Dropout Voltage is defined as the input to output differential when the output voltage drops 1% below its normal value.
6) V
IN
= 1.35V for V
OUT
= 0.5V to 0.85V

MP2000DJ-ADJ-LF-Z

Mfr. #:
Manufacturer:
Monolithic Power Systems (MPS)
Description:
LDO Voltage Regulators 150mA, Low Vin LDO w/adj Vout
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet