UB2 Indicators
www.nkk.com
M25
M
Indicators
AccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable
Toggles
Rockers
Touch
Tilt
Complement to UB2 Pushbuttons
PCB Mounting Snap-in Mounting Terminals
MOUNTING TYPES, SHAPES, & TERMINALS
01
Square
04
Square with Built-in Bezel
W03
Silver PC/Turret
(0.2)
.008
(4.0)
.157
(1.0)
.039
Thk = (0.5)
.020
Panel Thickness:
.039 ~ .126” (1.0 ~ 3.2mm)
LED COLORS & SPECIFICATIONS
The electrical specifications shown are determined at a basic temperature of 25°C. Polarity marks are on the bottom of the device.
If the source voltage exceeds the rated voltage, a ballast resistor is required. The resistor value can be calculated by using the
formula in the Supplement section. The LED is an integral part of the indicator and not available separately.
(+) (-) (+) (-)
Bright
Single Color LED
with 1 element
Super Bright
Single Color LED
with 1 element
Amber color can be achieved by lighting red and green simultaneously on the bicolor LED (not suitable for Alternating Legends).
LC (+)
L1 (-)
Red
L2 (-)
Green
Super Bright
Bicolor LED
with 2 elements
Bright Super Bright Super Bright
Color Red Amber Green White Green Blue Red/Green Unit
Forward Peak Current I
FM
30 30 25 20 30 25
30/25
Amber 25/22
mA
Typical Forward Current I
F
20 20 20 15 20 20 20/20 mA
Forward Voltage V
F
1.85 2.0 2.1 3.3 3.5 3.6 2.1/3.5 V
Reverse Peak Voltage V
RM
5 5 5 5 5 5 4/4 V
Current Reduction Rate Above 25°C ∆I
F
0.40 0.42 0.46 0.25 0.50 0.40 0.40/0.33
mA/°C
Ambient Temperature Range –25° ~ +50 –20° ~ +50 –25° ~ +50 °C
5C 5D 5F 6F 6G
Note for Super Bright:
6B 6CF
ATTENTION
ELECTROSTATIC
SENSITIVE DEVICES