DATE:
January
2012
© 2012 DESCO INDUSTRIES INC.
Employee Owned
MATERIAL TYPE
MICASTAT
DRAWING 10200
Electrical Properties:
Because the electrical properties of many high pressure laminates have some degree of humidity dependence, all high pressure laminate
materials should be carefully tested for adequate performance at low humidity prior to selection and installation.
Property Value Test Method
Rtt: 10E6 - 10E9 ohms ANSI/ESD S4.1, DIN 53 276
Rtg: 10E6 - 10E9 ohms ANSI/ESD S4.1, ASTM, F-150-72 NFPA-99, DIN 53 276
RVOL: Less than 10E8 ohms ASTM-D257
Charge Decay: <0.009 seconds FTMS-101C, Method 4046
Measured at 50% and 12% relative humidity. Test reports available upon request. Color and texture may vary between lots and mills.
Specifications:
Construction: High pressure thermoset amino resin laminate
Thickness: Nominal 0.038" (0.96mm)
Radius: 1.5" radius corner
Surface: Top - non-glare matte finish
Post Forming: 5/8" radius, NEMA LD 3.14
Weight: 0.31 lbs/sq ft (0.151 grams/cm
2
)
Abrasion Resistance: Exceeds NEMA LD 3-3.01 Standards
Chemical Resistance: Unaffected by most solvents
Heat Resistance: NEMA LD 3-3.06, 160°F (71°C) continuous
Cleaning: For optimum electrical performance of your ESD mat surface, clean regularly with an ESD mat cleaner. We suggest using
Reztore™ Surface & Mat Cleaner, Item #10435 or Static-Wipes Item #10600. Do not use cleaners with silicone. Silicone buildup will
create an insulative film on the surface.
Grounding: This material must be properly grounded for optimal electrical performance. Ask for Technical Bulletin TB-2000 for
grounding instructions.
Disclaimer:
All statements, technical data, and recommendations contained
herein are based upon tests we believe to be reliable. However,
the accuracy or completeness thereof is not guaranteed. The
proper and correct applications of products and data is the
responsibility of the user. Statements or recommendations not
contained herein shall have no force or effect unless embodied
in a written agreement signed by authorized officers of Desco
Industries, Inc.
Description:
The premium choice for ESD bench dissipative worksurfaces. Provides a durable and attractive ESD controlled dissipative
worksurface. Resists hot solder and most solvents; exceeds NEMA standards for wear resistance. Patented conductive layer
provides superior charge dissipation and zero voltage suppression.
DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: Desco.com
PHONE (909) 627-8178
DESCO EAST:
ONE COLGATE WAY, CANTON, MA 02021-1407
PHONE (781) 821-8370
RoHS Compliance Statement
None of the following materials are intentionally added
in manufacturing this product: lead, mercury, cadmium,
hexavalent chromium, polybrominated biphenyls (PBB) or
polybrominated diphenyl ethers (PBDE) as outlined in the
Directive 2002/95/EC Article 4.1. See Desco Industries Inc.
letter on-line at Desco.com.
Limited Warranty:
Desco warrants for one year that Statfree
®
matting products
will be free of defects in materials and workman ship and
will guarantee dissipative/ conductive mat properties for the
life of the mat. Damage to matting caused by misuse of any
kind, including using inappropriate cleaners is not covered
by Desco Limited Warranty.
Common Point
Ground 09826
3/8" Female
Snap Installed
Bench Pad
Micastat
®
Kits - Item Numbers
Hardware Included
Special sizes
available upon
request.
Top -- non-glare
matte finish.
Bottom -- Double
sided tape to attach.
Color
Beige
Blue
Grey
24" x 36"
10310
10344
10342
24" x 48"
10350
10384
10382
Look for the Micastat
®
brand on Desco laminate
sheets - for your
protection and auditing
purposes.
Micastat
®
Sheet
Size
30" x 10'
30" x 12'
36" x 8'
36" x 10'
36" x 12'
48" x 8'
48" x 12'
60" x 12'
Blue
10180
10181
10182
10183
10184
10185
10187
10190
Beige
10200
10202
10203
10204
10206
10208
10212
10215
White
10240
10242
10243
10244
10246
10248
10252
10255
Grey
10290
10291
10292
10293
10294
10295
10297
10300
Special sizes available upon
request.
Top -- non-glare matte finish.
Grounding hardware not included.
Micastat
®
Ground Kits 14246 &
14244 are recommended.
Ask for Technical Bulletin
TB-2091 for further information.
Micastat
®
Sheets - Item Numbers
Micastat
®
Dissipative Laminate
Tolerances:
Width ±.250"
Length ± .250" every 1 linear foot of running material.
Specications and procedures subject to change without notice.
