https://www.phoenixcontact.com/pi/products/1624014
08/20/2018Page1/3
Device connector, front mounting-CA-1RP1N8A2S00-1624014
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Device connector for front wall, straight, shielded: yes, SPEEDCON locking, M23, No. of pos.: 16+2+PE, type
of contact: Pin, Crimp connection, Flat gasket, 4x Ø 3.2, flange dimensions: 25 mm x 25 mm
Similar to figure, please order crimp
contacts separately
Why buy this product
Safe use in the field, thanks to high degree of protection
Connector for flexible on-site assembly
Consistent EMC protection for reliable transmission of signals
Crimping connection: vibration- and temperature-resistant assembly
Key Commercial Data
Packing unit 1 STK
GTIN
GTIN 4055626228181
Technical data
Data of the insulating body
Note
Order information: Order crimp contacts 16 x Ø 1 mm, 2 x Ø 1.5 mm, 1 x
Ø 1.5 (PE, first) separately
Coding N
Insulator material PA 6.6
Contact connection method Crimp connection
Type of contacts Pin
Application Signal
Number of positions 19
Contact diameter of power contacts 1.5 mm
Nominal current per power contact at 25°C 10 A
Nominal voltage, power contact 150 V
