HMC347ALP3E

7
SWITCHES - CHIP
14 - 3
Absolute Maximum Ratings
RF Input Power (Vctl = -5V) +27 dBm
Control Voltage Range (A & B) +0.5V to -7.5 Vdc
Hot Switch Power Level
(Vctl = -5 V)
+23 dBm
Channel Temperature 150 °C
Terminated Power Level
(Vctl = -5V)
+25dBm
Thermal Resistance
(Insertion Loss Path)
118 °C/ W
Thermal Resistance
(Terminated Path)
200 °C/W
Storage Temperature -65 to +150 °C
Operating Temperature -55 to +85 °C
ESD Sensitivity (HBM) Class 1A
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
HMC347ALP3E
GaAs MMIC SPDT NON-REFLECTIVE
SWITCH, DC - 14 GHz
v02.0217
Truth Table
Control Voltages
Control Input Signal Path State
A B RFC to RF1 RFC to RF2
High Low On Off
Low High Off On
State Bias Condition
Low 0 to -0.5V @ 10 uA Max.
High -5V @ 3uA Typ. to -7V @ 40 uA Max (± 0.5 Vdc)
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
7
SWITCHES - CHIP
14 - 4
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Outline Drawing
HMC347ALP3E
GaAs MMIC SPDT NON-REFLECTIVE
SWITCH, DC - 14 GHz
v02.0217
Part Number Package Body Material Lead Finish MSL Rating Package Marking
[2]
HMC347ALP3E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
MSL3
[1]
H347A
XXXX
[1] Max peak reow temperature of 260 °C
[2] 4-Digit lot number XXXX
Package Information
7
SWITCHES - CHIP
14 - 5
HMC347ALP3E
GaAs MMIC SPDT NON-REFLECTIVE
SWITCH, DC - 14 GHz
v02.0217
Pin Descriptions
Suggested Driver Circuit
Pin Number Function Description Interface Schematic
1, 5, 9, 12, 16 N/C
This pin should be connected to PCB RF ground to
maximize isolation
2, 4, 6, 8, 13, 15 GND
Package bottom has exposed metal paddle that must also
be connected to PCB RF ground.
3, 7, 14 RFC, RF1, RF2
This pin is DC coupled and matched to 50 Ohm. Blocking
capacitors are required if RF line potential is not equal to 0V.
10 CTLB See truth table and control voltage table.
11 CTLA See truth table and control voltage table.
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D

HMC347ALP3E

Mfr. #:
Manufacturer:
Analog Devices / Hittite
Description:
RF Switch ICs Switches
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet