NLV17SZ06
www.onsemi.com
2
MAXIMUM RATINGS
Symbol Characteristics Value Unit
V
CC
DC Supply Voltage −0.5 to +7.0 V
V
I
DC Input Voltage −0.5 ≤ V
I
≤ +7.0 V
V
O
DC Output Voltage Output in Z or LOW State (Note 1) −0.5 ≤ V
O
≤ 7.0 V
I
IK
DC Input Diode Current V
I
< GND −50 mA
I
OK
DC Output Diode Current V
O
< GND −50 mA
I
O
DC Output Sink Current ±50 mA
I
CC
DC Supply Current Per Supply Pin ±100 mA
I
GND
DC Ground Current Per Ground Pin ±100 mA
T
STG
Storage Temperature Range −65 to +150 °C
P
D
Power Dissipation in Still Air 186 mW
q
JA
Thermal Resistance 350 °C/W
T
L
Lead Temperature, 1 mm from Case for 10 Seconds 260 °C
T
J
Junction Temperature Under Bias +150 °C
I
Latch−Up
Latchup Performance Above V
CC
and Below GND at 85°C (Note 5) ±500 mA
MSL Moisture Sensitivity Level 1
F
R
Flammability Rating Oxygen Index: 28 to 34 UL 94 V−0 @ 0.125 in
ESD ESD Classification Human Body Model (Note 3)
Machine Model (Note 4)
Charged Device Model (Note 5)
Class IC
Class A
N/A
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. I
O
absolute maximum rating must be observed.
2. Tested to EIA/JESD22−A114−A, rated to EIA/JESD22−A114−B.
3. Tested to EIA/JESD22−A115−A, rated to EIA/JESD22−A115−A.
4. Tested to JESD22−C101−A.
5. Tested to EIA/JESD78.
RECOMMENDED OPERATING CONDITIONS
Symbol Parameter Min Max Unit
V
CC
Supply Voltage Operating
Data Retention Only
1.65
1.5
5.5
5.5
V
V
I
Input Voltage 0 5.5 V
V
O
Output Voltage (Z or LOW State) 0 5.5 V
T
A
Operating Free−Air Temperature −55 +125 °C
Dt/DV
Input Transition Rise or Fall Rate V
CC
= 2.5 V ±0.2 V
V
CC
= 3.0 V ±0.3 V
V
CC
= 5.0 V ±0.5 V
0
0
0
20
10
5
ns/V
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond
the Recommended Operating Ranges limits may affect device reliability.
