H
Series MS
Miniature Illuminated Slides
www.nkk.com
H38
Indicators
AccessoriesSupplement
Tactiles
KeylocksRotaries
Pushbuttons
Illuminated PB
Slides
Programmable
Rockers
Touch Tilt
Toggles
Electrical Capacity (Resistive Load)
Power Level: 6A @ 125V AC or 3A @ 250V AC
Other Ratings
Contact Resistance: 10 milliohms maximum
Insulation Resistance: 1,000 megohms minimum @ 500V DC
Dielectric Strength: 1,000V AC minimum between contacts for 1 minute minimum;
1,500V AC minimum between contacts & case for 1 minute minimum
Mechanical Life: 50,000 operations minimum
Electrical Life: 25,000 operations minimum
Contact Timing: Nonshorting (break-before-make)
Total Travel: .087” (2.2mm)
Materials & Finishes
Actuator: Polyamide (UL94V-0)
Frame: Stainless steel
Case: Glass fiber reinforced diallyl phthalate resin (UL94V-0)
Movable Contacts: Silver alloy
Stationary Contacts: Silver capped copper with silver plating
Terminals: Copper or brass with silver plating
Environmental Data
Operating Temp Range: –10°C through +55°C (+14°F through +131°F)
Humidity: 90 ~ 95% humidity for 240 hours @ 40°C (104°F)
Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range
& returning in 1 minute; 3 right angled directions for 2 hours
Shock: 50G (490m/s
2
) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Processing
Soldering Time & Temp: Wave Soldering Recommended (PC version): See Profile A in Supplement section.
Manual Soldering: See Profile A in Supplement section.
Note: Lever must be in center position while soldering.
Cleaning: These devices are not process sealed. Hand clean locally using alcohol based solution.
Standards & Certifications
Flammability Standards: UL94V-0 rated actuator & case
General Specifications