AA4040ZGS Datasheet AA4040ZGS | P1-P3

SPEC NO: DSAL0886 REV NO: V.2 DATE: APR/13/2011 PAGE: 1 OF 6

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1201006684

4.0x4.0mm RIGHT ANGLE SURFACE MOUNT

LED LAMP

ATTENTION

OBSERVE PRECAUTIONS

FOR HANDLING

ELECTROSTATIC

DISCHARGE

SENSITIVE

DEVICES

Part Number: AA4040ZGS Green

Features

z Single color.

z Suitable for all SMT assembly and solder process.

z Available on tape and reel.

z Ideal for backlighting.

z Package : 500pcs / reel.

z Moisture sensitivity level : level 3.

z RoHS compliant.

Description

The Green source color devices are made with InGaN

on Sapphire Light Emitting Diode.

Static electricity and surge damage the LEDS.

It is recommended to use a wrist band or anti-electrostatic

glove when handling the LEDs.

All devices, equipment and machinery must be electrically

grounded.

Package Dimensions

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.

4. The device has a single mounting surface. The device must be mounted according to the specifications.

SPEC NO: DSAL0886 REV NO: V.2 DATE: APR/13/2011 PAGE: 2 OF 6

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1201006684

Handling Precautions

Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic

significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.

As a result, special handling precautions need to be observed during assembly using silicone encapsulated

LED products. Failure to comply might lead to damage and premature failure of the LED.

1. Handle the component along the side surfaces by using forceps or appropriate tools.

2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.

3. As silicone encapsulation is permeable to gases, some corrosive substances such as H

S might corrode silver plating of

leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances.

SPEC NO: DSAL0886 REV NO: V.2 DATE: APR/13/2011 PAGE: 3 OF 6

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1201006684

Selection Guide

Notes:

1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.

2. Luminous intensity/ luminous Flux: +/-15%.

Absolute Maximum Ratings at TA=25°C

Electrical / Optical Characteristics at TA=25°C

Notes:

1.Wavelength: +/-1nm.

2. Forward Voltage: +/-0.1V.

Note:

1. 1/10 Duty Cycle, 0.1ms Pulse Width.

Part No. Dice Lens Type

iewing

Angle [1]

Min. Typ. 2θ1/2

AA4040ZGS Green (InGaN) Water Clear 400 800

120

Iv (mcd) [2]

@ 20mA

Symbol Parameter Device Typ. Max. Units Test Conditions

λpeak Peak Wavelength Green 515

nm I

F=20mA

λD [1] Dominant Wavelength Green 525

nm I

F=20mA

Δλ1/2 Spectral Line Half-width Green 30

nm I

F=20mA

C Capacitance Green 45

pF V

F=0V;f=1MHz

F [2] Forward Voltage Green 3.3 4.1 V IF=20mA

R Reverse Current Green

50 uA VR=5V

Parameter Green Units

Power dissipation 102.5 mW

DC Forward Current 25 mA

Peak Forward Current [1] 150 mA

Reverse Voltage 5 V

Operating Temperature -40°C To +85°C

Storage Temperature -40°C To +85°C

P1-P3 P4-P6

AA4040ZGS

Mfr. #:

Buy AA4040ZGS

Manufacturer:

Kingbright

Description:

Standard LEDs - SMD Green Water Clear 525nm 800mcd

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

AA4040ZGS