OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

SPS2F001PET

P1-P3P4-P6
© Semiconductor Components Industries, LLC, 2017
February, 2018 − Rev. 0
1 Publication Order Number:
SPSXF001/D
SPSXF001
Smart Passive Sensort for
Indirect Moisture Sensing
Description
The SPSXF001 is a battery−free wireless sensor for moisture level
detection on non−metal surfaces. Smart Passive Sensors use the
Magnus−S2
®
Sensor IC from RF Micron, a UHF RFID chip that is
powered by RF energy harvesting from the UHF reader. The
Magnus−S2 utilizes the patented self−tuning Chameleont engine that
adapts the RF front−end to optimize performance in various
environmental conditions. Changes in antenna detuning due to
moisture contact are digitized by the sensor which can then be read by
a standard EPC Gen 2 compliant reader. These sensor tags function in
either the FCC defined UHF band or the ETSI UHF band.
The small form factor and battery−free capabilities of Smart Passive
Sensors allow them to be designed into applications where size and
accessibility are at a premium.
Features
• Single IC, Smart Passive Sensing
• Small Form Factor Packages
• Direct Moisture Contact Sensing
• On−chip RSSI Sensor
• 64 bit TID and 128 bit EPC + 144 Bit User Defined Memory
• EPC Class 1 Gen 2 v.2.0.0 ISO 18 000−6C Compliant
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
Applications
• Medical
• Industrial
• Facilities Management
MAXIMUM RATINGS (T
A
= 25°C unless otherwise noted)
Rating
Symbol Max Unit
Human Body Model (Note 1) ESD ±1 kV
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
1. Non−repetitive current pulse at T
A
= 25°C, per JS−001 waveform.
THERMAL CHARACTERISTICS
Characteristic Symbol Max Unit
Operating and Storage Temperature
Range (Note 2)
T
OP
, T
stg
−20 to +60 °C
2. Shelf Life − minimum 2 years from date of manufacturing.
www.onsemi.com
RF TAG 104.78x19.05MM
CASE 888AB/AC
See detailed ordering and shipping information on page 5 o
f
this data sheet.
ORDERING INFORMATION
SPSXF001
www.onsemi.com
2
Table 1. ELECTRICAL CHARACTERISTICS (T
A
= 25°C unless otherwise noted)
Parameter
Min Max Units
Operating Frequency (Note 3)
FCC 902 928 MHz
ETSI
866 868 MHz
Read Sensitivity (Note 4) −16 dBm
Sensor Code 5 codes
RSSI Code 5 Codes
TID 64 bits
EPC (Note 5) 128 bits
User Memory (Note 5) 144 bits
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
3. Band specific part numbers can be found in the ordering information table
4. Measured in free space, anechoic chamber with a linearly polarized antenna at 50 cm read distance
5. User Memory can be configured to be an EPC extension, effectively making a 272 bit EPC code
Figure 1. Liquid Container Test
Moisture Sensing
The SPSXF001 generates sensor codes from 0 to 31, with
a free space sensor code average of 14. Figure 1 shows the
moisture sensitive portion of the tag used to collect the data
in Figure 2. When placed on a thin plastic container, the
SPSXF001 detects whether or not there is fluid on the other
side of the container and will shift its sensor code as seen in
Figure 1. For water levels seen in Figure 1, the sensor value
shifts approximately 9 codes when water is detected behind
the tag. Due to the Smart Passive Sensors’ self−tuning
capability, the sensor code will shift over frequency as it
tunes itself to maximize reflected power to the reader. This
makes it important to account for the frequency at which the
sensor was read. This factor must be accounted for in the
reader software in order to ensure reliable fluid level
readings. For more information on how Smart Passive
Sensors generate sensor codes, please refer to Application
Note AND9209/D.
Figure 2. Sensor Code for Full and Empty Conditions
FULL
EMPTY
SPSXF001
www.onsemi.com
3
Table 2. MEMORY MAP
Bank # Bank Name R/W Bit Address Description LSB MSB Default Value
11 USER
N/A A0−AF On−chip RSSI Threshold N/A
READ/WRITE
80−8F User Memory 0
70−7F User Memory 0
60−6F User Memory 0
50−5F User Memory 0
40−4F User Memory 0
30−3F User Memory 0
20−2F User Memory 0
10−1F User Memory 0
00−0F User Memory 0
10 TID READ ONLY
50−5F TID[15:0]
40−4F TID[31:16]
30−3F TID[47:32]
20−2F Extended TID Header
10−1F Tag Model Number
08−13 Manufacturer ID
00−07 Class ID
01 EPC
WRITE ONLY 140−14F EPC Configure 0
READ/WRITE
90−9F EPC#[15:0] 0
80−8F EPC#[31:16] 0
70−7F EPC#[47:32] 0
60−6F EPC#[63:48] 0
50−5F EPC#[79:64] 0
40−4F EPC#[95:80] 0
30−3F EPC#[111:96] 0
20−2F EPC#[127:112] 0
10−1F StoredPC[15:0] 0
READ ONLY 00−0F StoredCRC[15:0] 0
00 RESERVED
READ/WRITE F0−FF Sensor Overwrite 0
READ ONLY
D0−DF On−chip RSSI Code N/A
B0−BF Sensor Code N/A
READ/WRITE
50−5F Analog Overwrite 0
30−3F Access Password[15:0] 0
20−2F Access Password[31:16] 0
10−1F Kill Password[15:0] 0
00−0F Kill Password[31:16] 0
P1-P3P4-P6

SPS2F001PET

Mfr. #:
Buy SPS2F001PET
Manufacturer:
ON Semiconductor
Description:
RFID Transponders ETSI-FLUID LEVEL-PET
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet