TCP-3082H-QT

© Semiconductor Components Industries, LLC, 2014
October, 2014 − Rev. 0
1 Publication Order Number:
TCP−3082H/D
TCP-3082H
8.2 pF Passive Tunable
Integrated Circuits (PTIC)
Introduction
ON Semiconductors PTICs have excellent RF performance and
power consumption, making them suitable for any mobile handset or
radio application. The fundamental building block of our PTIC
product line is a tunable material called ParaScant, based on Barium
Strontium Titanate (BST). PTICs have the ability to change their
capacitance from a supplied bias voltage generated by the Control IC.
The 8.2 pF PTICs are available as wafer-level chip scale packages
(WLCSP) and in QFN packages for easy mounting directly on printed
circuit boards.
Key Features
High Tuning Range and Operation up to 20 V
Usable Frequency Range: from 700 MHz to 2.7 GHz
High Quality Factor (Q) for Low Loss
High Power Handling Capability
Compatible with PTIC Control IC TCC-103
WLCSP Package: 0.722 x 1.179 x 0.611 mm (12 pillar)
QFN Package: 1.200 x 1.600 x 0.950 mm
QFN: MSL−2 Moisture Sensitivity Level (per J−STD−020)
These devices are Pb−Free and RoHS Compliant
Typical Applications
Multi-band, Multi-standard, Advanced and Simple Mobile Phones
Tunable Antenna Matching Networks
Tunable RF Filters
Active Antennas
http://onsemi.com
MARKING DIAGRAM
Device Package Shipping
ORDERING INFORMATION
TCP−3082H−DT WLCSP12
(Pb−Free)
4000 Units /
7” Reel
WLCSP12
1.18x0.72
CASE 567KE
X.X = 8.2
H = High Tuning
X.XH
QFN6
1.6x1.2
CASE 485DX
TCP−3082H−QT QFN6
(Pb−Free)
8000 Units /
13“ Reel
FUNCTIONAL BLOCK DIAGRAM
PTIC Functional Block Diagram
PTIC
Bias
RF1 RF2
For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
s
Brochure, BRD8011/D.
TCP−3082H
http://onsemi.com
2
TYPICAL SPECIFICATIONS
Representative Performance Data at 255C
Table 1. PERFORMANCE DATA
Parameter Min Typ Max Units
Operating Bias Voltage 2.0 20 V
Capacitance (V
bias
= 2 V) 7.38 8.20 9.02 pF
Capacitance (V
bias
= 20 V) 2.05 2.16 2.27 pF
Tuning Range (2 V - 20 V) 3.40 3.80 4.20
Tuning Range (20 V - 2 V) 3.60
Leakage Current (WLCSP) 2.0
mA
Operating Frequency 700 2700 MHz
Quality Factor @ 700 MHz, 10 V 100
Quality Factor @ 2.4 GHz, 10 V 70
IP3 (V
bias
= 2 V)
[1,3]
70 dBm
IP3 (V
bias
= 20 V)
[1,3]
85 dBm
2nd Harmonic (V
bias
= 2 V)
[2,3]
-75 dBm
2nd Harmonic (V
bias
= 20 V)
[2,3]
-85 dBm
3rd Harmonic (V
bias
= 2 V)
[2,3]
-40 dBm
3rd Harmonic (V
bias
= 20 V)
[2,3]
-70 dBm
Transition Time (Cmin ³ Cmax)
[4]
80
ms
Transition Time (Cmax ³ Cmin)
[4]
70
ms
1. f
1
= 850 MHz, f
2
= 860 MHz, Pin 25 dBm/Tone
2. 850 MHz, Pin +34 dBm
3. IP3 and Harmonics are measured in the shunt configuration in a 50 W environment
4. RF
IN
and RF
OUT
are both connected to DC ground
TCP−3082H
http://onsemi.com
3
Representative performance data at 255C for 8.2 pF WLCSP Package
Figure 1. Capacitance Figure 2. Harmonic Power*
Figure 3. IP3* Figure 4. Q*
*The data shown is based on the TCP−1082N device performance, for reference only. The TCP−3082H performance data will be available in
the Production Datasheet.
Table 2. ABSOLUTE MAXIMUM RATINGS
Parameter Rating Units
Input Power +40 dBm
Bias Voltage +25 (Note 5) V
Operating Temperature Range −30 to +85 °C
Storage Temperature Range −55 to +125 °C
ESD − Human Body Model Class 1A JEDEC HBM Standard (Note 6)
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
5. WLCSP: Recommended Bias Voltage not to exceed 20 V
6. Class 1A defined as passing 250 V, but may fail after exposure to 500 V ESD pulse

TCP-3082H-QT

Mfr. #:
Manufacturer:
ON Semiconductor
Description:
RF Wireless Misc PTIC QFN IN REEL
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet