© Semiconductor Components Industries, LLC, 2007
August, 2017 − Rev. 4
1 Publication Order Number:
MURS480E/D
MURS480ET3G
SWITCHMODE Power
Rectifiers
Ultrafast “E’’ Series with High Reverse
Energy Capability
These state−of−the−art devices are designed for use in switching
power supplies, inverters and as free wheeling diodes.
Features
• 20 mJ Avalanche Energy Guaranteed
• Excellent Protection Against Voltage Transients in Switching
Inductive Load Circuits
• Ultrafast 75 Nanosecond Recovery Time
• 175°C Operating Junction Temperature
• Low Forward Voltage
• Low Leakage Current
• High Temperature Glass Passivated Junction
• Reverse Voltage to 800 V
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
Mechanical Characteristics:
• Case: Epoxy, Molded
• Weight: 217 mg (Approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
• Shipped in 16 mm Tape & Reel, 2500 Units per Reel
• Polarity: Polarity Band on Plastic Body Indicates Cathode Lead
MAXIMUM RATINGS
Rating Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage MURS480E
V
RRM
V
RWM
V
R
800
V
Average Rectified Forward Current I
F(AV)
4.0 @
T
L
=110°C
A
Non−Repetitive Peak Surge Current
(Surge Applied at Rated Load Conditions
Halfwave, Single Phase, 60 Hz)
I
FSM
70 A
Operating Junction and Storage Temperature
Range
T
J
, T
stg
−65 to
+175
°C
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
ULTRAFAST RECTIFIER
4.0 AMPERES, 800 VOLTS
www.onsemi.com
Device Package Shipping
†
ORDERING INFORMATION
MARKING DIAGRAM
U4 = Specific Device Code
A = Assembly Location*
Y = Year
WW= Work Week
MURS480ET3G SMC
(Pb−Free)
2500/Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
*The Assembly Location code (A) is front side optional.
In cases where the Assembly Location is stamped in
the package, the front side assembly code may be
blank.
SMC 2−LEAD
CASE 403AC
AYWW
U4AG
G