OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com
Issue C 09/2012
Page 1 of 8
4-Pin LED Lamp
(7.6 mm)
OVFSxxC8
•
Packaged in tubes
•
Compatible with automatic placement equipment
•
Compatible with infrared and vapor phase reflow solder process
•
Mono-colors
•
Pb-free
Product Photo Here
Part Number Material Emitted Color Flux Typ. mlm Lens Color
OVFSAAC8
AllnGaP Amber 8000 Clear
OVFSB7C8
InGaN Blue 2500 Clear
OVFSG7C8
InGaN Green 8500 Clear
OVFSRAC8
AllnGaP Red 8000 Clear
OVFSW6C8
InGaN White 7000 Clear
DIM A
[1.50]
.059
[1.29]
.051
[1.29]
.051
[1.50]
.059
[1.90]
.075
Beam Angle
100°
70°
70°
100°
60°
DO NOT LOOK DIRECTLY
AT LED WITH UNSHIELDED
EYES OR DAMAGE TO
RETINA MAY OCCUR.
RoHS
The OVFSxxC8
series
is designed with higher forward voltage to maximize brightness and incorporates a low-
profile lens to enhance efficient light distribution. Response time is fast and it consumes less power resulting in low
current requirements from circuit power supply. Tubular arrays replace neon in outdoor and indoor signs. This
square package allows high-density arrays to form light engines.
Applications
• Automotive: Rear stop/turn signal lamps/truck marker lamps
• Mood-setting decoration and landscape lighting
• Special decorative interior/exterior lighting
• Special effects stage lighting
• Illumination for signs and channel letters
• Traffic signals, pedestrian and walkway
signs