SPEC NO: DSAN8384 REV NO: V.2B DATE: MAR/09/2015 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1203014451
Selection Guide
Notes:
1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2.Luminous intensity/ luminous Flux: +/-15%.
3.Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Part No. Dice Lens Type
iewing
Angle [1]
Min. Typ. 2θ1/2
APDA3020LVBC/D Blue (InGaN) Water Clear 80 150
10
°
Iv (mcd) [2]
@ 2mA
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2.Forward Voltage: +/-0.1V.
3.Wavelength value is traceable to the CIE127-2007 compliant national standards.
4.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Blue 465
nm I
F=2mA
λD [1] Dominant Wavelength Blue 470
nm I
F=2mA
Δλ1/2 Spectral Line Half-width Blue 22
nm I
F=2mA
C Capacitance Blue 100
pF V
F=0V;f=1MHz
V
F [2] Forward Voltage Blue 2.65 3 V IF=2mA
I
R Reverse Current Blue
50 uA VR=5V
Min.
2.2
Parameter Blue Units
Power dissipation 90 mW
DC Forward Current 30 mA
Peak Forward Current [1] 100 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C