LQW15AN8N2G0ZD Datasheet LQW15AN20NG0ZD, LQW15AN18NJ0ZD, LQW15AN8N2G0ZD | P7-P9

SpecNo.JELF243A-9114E-01 P.7/13

MURATA MFG.CO.,LTD

Reference Only

7. Q200 Requirement

7.1.Performance (based on Table 5 for Magnetics(Inductors / Transformer)

AEC-Q200 Rev.D issued June 1. 2010

AEC-Q200

Murata Specification / Deviation

No Stress Test Method

3 High

Temperature

Exposure

1000hours at 125 deg C

Set for 24hours at room

temperature, then measured.

Meet Table A after testing.

Table A

4 Temperature Cyclin

1000cycles

-40 deg C to +125 deg C

Set for 24hours at room

temperature,then

measured.

Meet Table A after testing.

7 Biased Humidity 1000hours at 85 deg C, 85%RH

unpowered..

Meet Table A after testing.

8 Operational Life Apply 125 deg C 1000hours

Set for 24hours at room

temperature, then measured

Meet Table A after testing.

9 External Visual Visual inspection

No abnormalities

10 Physical Dimension Meet ITEM 5

(Style and Dimensions)

No defects

12 Resistance

to Solvents

Per

MIL-STD-202

Method 215

Not Applicable

13 Mechanical Shock

Per MIL-STD-202

Method 213

Condition C : 100g’s(0.98N),

6ms, Half sine, 12.3ft / s

Meet Table A after testing.

14 Vibration 5g's(0.049N) for 20 minutes,

12cycles each of 3 orientations

Test from 10-2000Hz.

Meet Table A after testing.

15 Resistance

to Soldering Heat

No-heating

Solder temperature

260C+/-5 deg C

Immersion time 10s

Pre-heating: 150C + / -10 deg C, 60s to 90s

Meet Table A after testing.

17 ESD

Per AEC-Q200-002 ESD Rank: Refer to Item 3. Rating.

Meet Table A after testing

18 Solderbility

Per J-STD-002 Method b : Not Applicable

95% of the terminations is to be soldered.

(Except exposed wire)

19 Electrical

Characterization

Measured：Inductance

No defects

20 Flammability Per UL-94 Not Applicable

Appearance No damage

Inductance change

(at 100MHz)

Within ±5％

SpecNo.JELF243A-9114E-01 P.8/13

MURATA MFG.CO.,LTD

Reference Only

AEC-Q200

Murata Specification / Deviation

No Stress Test Method

21 Board Flex Epoxy-PCB(1.6mm)

Deflection 2mm(min)

Holding time 60s

Meet Table B after testing.

Table B

22 Terminal Strength Per AEC-Q200-006

A force of 17.7N

for 60s

No defects

Murata Deviation Request: 5N / 60s

8. Specification of Packaging

8.1 Appearance and Dimensions of paper tape (8mm-wide)

(in mm)

Inductance

A∗ (mm)

(Tolerance ±0.03)

B∗ (mm)

(Tolerance ±0.03)

1N5, 2N4～2N8, 3N9～4N8, 5N8～6N8, 8N2～9N9, 11N, 12N, 15N 0.69 1.18

1N6～1N8, 2N9, 3N0, 3N1, 3N2, 4N9～5N1, 6N9-7N5, 10N, 13N,

16N～23N, R10, R12

0.66 1.18

24N～91N 0.64 1.18

∗Typical value

8.2 Specification of Taping

(1) Packing quantity (standard quantity)

10,000 pcs. / reel

(2) Packing Method

Products shall be packed in the cavity of the base tape and sealed by Cover tape.

(3) Sprocket hole

The sprocket holes are to the right as the tape is pulled toward the user.

(4) Spliced point

Base tape and Cover tape has no spliced point.

(5) Missing components number

Missing components number within 0.1% of the number per reel or 1 pc., whichever is greater, and are not

continuous. The Specified quantity per reel is kept.

8.3 Pull Strength

Cover tape 5N min.

8.4 Peeling off force of cover tape

Speed of Peeling off 300mm/min

Peeling off force

0.1N to 0.6N

(minimum value is typical)

Cover tape

Base tape

165

to 180

゜

1.18±0.03

2.0±0.05

4.0±0.1

1.5±

3.5±0.05

8.0±0.2

0.8 max.

0.1

1.75±0.1

Direction of feed

Appearance No damage

DC resistance change Within ±10％

SpecNo.JELF243A-9114E-01 P.9/13

MURATA MFG.CO.,LTD

Reference Only

8.5 Dimensions of Leader-tape,Trailer and Reel

There shall be leader-tape (cover tape and empty tape) and trailer-tape (empty tape) as follows.

(in mm)

8.6 Marking for reel

Customer part number, MURATA part number, Inspection number(∗1), RoHS marking(∗2), Quantity etc ･･･

∗1) <Expression of Inspection No.> □□ OOOO ×××

(1) (2) (3)

(1) Factory Code

(2) Date First digit : Year / Last digit of year

Second digit

: Month / Jan. to Sep. → 1 to 9, Oct. to Dec. → O, N, D

Third, Fourth digit : Day

(3) Serial No.

∗2) « Expression of RoHS marking » ROHS – Y (△)

(1) (2)

(1) RoHS regulation conformity

(2) MURATA classification number

8.7 Marking for Outside package (corrugated paper box)

Customer name, Purchasing order number, Customer part number, MURATA part number, RoHS Marking (∗2) ,

Quantity, etc ･･･

8.8. Specification of Outer Case

Outer Case Dimensions (mm)

Standard Reel Quantity

in Outer Case (Reel)

W D H

186 186 93 5

∗ Above Outer Case size is typical. It depends on a quantity

of an order.

9. Caution

Limitation of Applications

Please contact us before using our products for the applications listed below which require especially high reliability

for the prevention of defects which might directly cause damage to the third party's life, body or property.

(1) Aircraft equipment

(6) Transportation equipment (trains, ships, etc.)

(2) Aerospace equipment (7) Traffic signal equipment

(3) Undersea equipment (8) Disaster prevention / crime prevention equipment

(4) Power plant control equipment

(9) Data-processing equipment

(5) Medical equipment

(10) Applications of similar complexity and /or reliability

requirements to the applications listed in the above

Label

Empty tape

190 min.

Leader

Trailer

2.0±0.5

13.0±0.2

21.0±0.8

180

9.0

13.0±1.4

-3

Direction of feed

210 min.

160 min.

Cover tape

-0

Label

P1-P3 P4-P6 P7-P9 P10-P12 P13-P13

LQW15AN8N2G0ZD

Mfr. #:

Buy LQW15AN8N2G0ZD

Manufacturer:

Murata Electronics

Description:

Fixed Inductors 0402 8.2nH 0.14ohms 540mA +/-2%

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

LQW15AN8N2G0ZD

LQW15AN8N2G0ZD

Products related to this Datasheet