Bristol, PA 19007-6810 USA
TEL (215) 781-9956 • FAX (215) 781-9845
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
•
INFO@ARIESELEC.COM
WWW.ARIESELEC.COM
FEATURES
• A cost-effective means of upgrading to SOIC without changing your PCB layout
• Available on 0.300 [7.62] centers. Consult Data Sheet 18011 for Adapters on 0.400
[10.16] or 0.600 [15.24] centers
GENERAL SPECIFICATIONS
• BOARD MATERIAL: 0.062 thick FR-4 with 1-oz. Cu traces, both sides
• PINS: Brass 360 1/2-hard per UNS C36000 ASTM-B16-00
• PIN PLATING: Sn/Pb 93/7 per ASTM B 545 over 100μ [2.54μ] Ni per SAE AMS-
QQ-N-290
• OPERATING TEMPERATURE: 221°F [105°C]
MOUNTING CONSIDERATIONS
• SUGGESTED PCB HOLE SIZE: 0.028 ±0.003 [0.71 ±0.08] dia.
18007
Rev. AB
Series 35W000
SOWIC-to-DIP Adapter – 14/28 Pins
P/N Pins Type Dim. “B” Centers “C” Dim. “E” Dim. “F” Dim. “G” Dim. “H”
14-35W000-10
14 SOIC 0.500 [12.70] 0.300 [7.62] 0.465 [11.81] 0.076 [1.93] 0.500 [12.70] 0.180 [4.57]
16-35W000-10
16 SOIC 0.500 [12.70] 0.300 [7.62] 0.465 [11.81] 0.076 [1.93] 0.550 [13.97] 0.180 [4.57]
18-35W000-10
18 SOIC 0.500 [12.70] 0.300 [7.62] 0.465 [11.81] 0.076 [1.93] 0.550 [13.97] 0.180 [4.57]
20-35W000-10
20 SOIC 0.500 [12.70] 0.300 [7.62] 0.465 [11.81] 0.076 [1.93] 0.550 [13.97] 0.180 [4.57]
24-35W000-10
24 SOIC 0.500 [12.70] 0.300 [7.62] 0.465 [11.81] 0.076 [1.93] 0.550 [13.97] 0.180 [4.57]
28-35W000-10
28 SOIC 0.500 [12.70] 0.300 [7.62] 0.465 [11.81] 0.076 [1.93] 0.550 [13.97] 0.180 [4.57]
ORDERING INFORMATION
See Table below for P/Ns
CUSTOMIZATION: In addition to the standard products shown
on this page, Aries specializes in custom design and production.
Special materials, platings, sizes, and configurations can be
furnished, depending on the quantity. NOTE: Aries reserves the
right to change product general specifications without notice.
ALL DIMENSIONS: INCHES [MILLIMETERS]
ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED
“A” = NO. OF PINS PER ROW x 0.100 [2.54]
“D” = (NO. OF PINS PER ROW -1) x 0.100 [2.54]
AVAILABLE IN PANELIZED FORM WITH OR WITHOUT CUSTOMER-
SUPPLIED DEVICES MOUNTED. CONSULT FACTORY.
CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS
