ADM2486 Data Sheet
Rev. E | Page 6 of 20
ADM2486 CHARACTERISTICS
PACKAGE CHARACTERISTICS
Table 3.
Parameter Symbol Min Typ Max Unit Test Conditions
Resistance (Input-to-Output)
1
R
I-O
10
12
Ω
Capacitance (Input-to-Output)
1
C
I-O
3 pF f = 1 MHz
Input Capacitance
2
C
I
4 pF
Input IC Junction-to-Case Thermal Resistance θ
JCI
33 °C/W
Thermocouple located at center
of package underside
Output IC Junction-to-Case Thermal Resistance θ
JCO
28 °C/W
1
Device considered a 2-terminal device: Pin 1 through Pin 8 shorted together, and Pin 9 through Pin 16 shorted together.
2
Input capacitance is from any input data pin to ground.
REGULATORY INFORMATION
The ADM2486 has been approved by the following organizations:
Table 4.
Organization Approval Type Notes
UL Recognized under 1577 component recognition program. File E214100.
In accordance with UL1577, each ADM2486
is proof tested by applying an insulation test
voltage ≥3000 V
rms
for 1 sec (current leakage
detection limit = 5 μA).
CSA
Approved under CSA Component Acceptance Notice #5A. File 205078.
IEC 609501 800 V
rms
(1131 V
PEAK
) Basic, 400 V
rms
(565 V
PEAK
) reinforced.
VDE
Certified according to DIN V VDE V 0884-10 (VDE V 0884-10): 2006-12.
File 2471900-4880-0001.
In accordance with VDE V 0884-10, each
ADM2486 is proof tested by applying an
insulation test voltage ≥1050 V
PEAK
for 1 sec
(partial discharge detection limit = 5 pC).
INSULATION AND SAFETY-RELATED SPECIFICATIONS
Table 5.
Parameter Symbol Value Unit Conditions
Rated Dielectric Insulation Voltage 2500 V rms 1-minute duration.
Minimum External Air Gap (Clearance) L(I01) 7.45 minimum mm
Measured from input terminals to output
terminals, shortest distance through air.
Minimum External Tracking (Creepage) L(I02) 8.1 minimum mm
Measured from input terminals to output
terminals, shortest distance along body.
Minimum Internal Gap (Internal Clearance) 0.017 minimum mm Insulation distance through insulation.
Tracking Resistance (Comparative Tracking Index) CTI >175 V DIN IEC 112/VDE 0303 Part 1.
Isolation Group IIIa Material Group (DIN VDE 0110, 1/89, Table 1).
