1
PHASE-OUT
Power entry modules without line filter
GRM1
www.schurter.com/pg05
Connectors
IEC Appliance Inlet C14 with Fuseholder 2-pole, Line Switch 2-pole and Voltage Selector
C14
70° C
Description
- Panel Mount:
Snap-in version from rear-side
- 4 Functions:
Appliance Inlet Protection class I, Line Switch 2-pole, Fuseholder for
fuse-links 5 x 20 mm on the rear-side, Voltage Selectors (Jumper)
Approvals
- VDE Certificate Number: 40024784
- UL File Number: E93617
Characteristics
- Short Mounting Depth
Time saving “Lock and Shield” snap-in design for rear-panel mounting
- All single elements are already wired
except voltage selector
- Fuseholder on the inside of the equipment prevents accidental use of
incorrect fuse-links by the user
- Voltage selector for two voltage ranges
- Insulation cover on the rear-side
- Especially suitable for use in switching power supplies
- Qualified for use in equipment according IEC/EN 60950
Other versions on request
- Panel thickness 1.0 / 2 / 2.5 mm (max.)
- Fuseholder 1-pole
- Line switch 1-pole
- Line switch with other rocker marking
- Without housing and cover on the rear-side
- For protection class II (only without housing and cover on the rear-side)
- Voltage selector with other marking
References
This type is Phase-out without alternate type
Last order date: 31.12.2012
Weblinks
pdf-datasheet, html-datasheet, General Product Information, Approvals,
RoHS, CHINA-RoHS, Mating Connectors, e-Shop, SCHURTER-Stock-
Check, Distributor-Stock-Check, CAD-Drawings, Accessories, Detailed
request for product
Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset.
The cord latching system prevents against accidental removal of the cordset.
Technical Data
Ratings IEC 10 A / 250 VAC; 50/60 Hz
Ratings UL/CSA 10 A / 250 VAC; 50/60 Hz
Dielectric Strength > 2.3 kVAC between L-N
> 2.8 kVAC between L/N-PE
(1 min/50 Hz)
Allowable Operation Temp. -25 °C to 70 °C
Degree of Protection from front side IP 40 acc. to IEC 60529
Protection Class Suitable for appliances with protection
class I acc. to IEC 61140
Terminal Quick connect terminals 4.8 x 0.8 mm
Solder terminal on request
Solder terminals on voltage selector
Panel Thickness s Snap-in: 1.5 mm
(other on request)
Material: Housing Thermoplastic, black, UL 94V-0
Appliance Inlet C14 acc. to IEC 60320,
UL 498, CSA C22.2 no. 42 (for cold
conditions) pin-temperature 70 °C, 10 A,
Protection Class I
Fuseholder 1 or 2 pole, Shocksafe category PC2
acc. to IEC 60127-6,
for fuse-links 5 x 20 mm
Rated Power Acceptance @
Ta 23 °C
5 x 20: 2 W (1 pole)/ 1.6 W (2-pole) per
pole
Power Acceptance @ Ta >
23°C
Admissible power acceptance at hig-
her ambient temperature see derating
curves
Line Switch Rocker switch 2-pole, non-illuminated,
acc. to IEC 61058-1
Technical Details
Voltage Selectors optional jumper, 2 pos.