HMC383

For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
LINEAR & POWER AMPLIFIERS - SMT
4
HMC383LC4
v05.0514
GaAs PHEMT MMIC MEDIUM
POWER AMPLIFIER, 12 - 30 GHz
Absolute Maximum Ratings
Drain Bias Voltage (Vdd) +5.5 Vdc
RF Input Power (RFIN)(Vdd = +5Vdc) +10 dBm
Channel Temperature 175 °C
Continuous Pdiss (T= 85 °C)
(derate 10 mW/°C above 85 °C)
0.92 W
Thermal Resistance
(channel to ground paddle)
98 °C/W
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
ESD Sensitivity (HBM) Class 1A
Vdd (V) Idd (mA)
+4.5 99
+5.0 100
+5.5 101
Typical Supply Current vs. Vdd
Note: Amplier will operate over full voltage ranges shown above
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES
GOLD OVER 50 MICROINCHES MINIMUM NICKEL.
3. ALL DIMENSIONS ARE IN INCHES [MM]
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C-
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND
Package Information
Part Number Package Body Material Lead Finish MSL Rating Package Marking
[2]
HMC383LC4 Alumina, White Gold over Nickel
MSL3
[1]
H383
XXXX
[1] Max peak reow temperature of 260 °C
[2] 4-Digit lot number XXXX
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
LINEAR & POWER AMPLIFIERS - SMT
5
HMC383LC4
v05.0514
GaAs PHEMT MMIC MEDIUM
POWER AMPLIFIER, 12 - 30 GHz
Pin Descriptions
Pin Number Function Description Interface Schematic
1, 2, 4 - 15,
17, 18, 20 - 24
N/C
No connection required. These pins may be connected
to RF/DC ground without affecting performance if using
grounded coplanar wave guide transmission lines.
3 RFIN
This pad is AC coupled and
matched to 50 Ohms.
16 RFOUT
This pad is AC coupled and
matched to 50 Ohms.
19 Vdd
Power Supply Voltage for the amplier. External bypass
capacitors of 100 pF, 1,000 pF and 2.2 µF are required.
GND
Package base has an exposed metal ground
that must be connected to RF/DC ground.
Vias under the device are required
Application Circuit
Component Value
C1 100 pF
C2 1,000 pF
C3 2.2 µF
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
LINEAR & POWER AMPLIFIERS - SMT
6
HMC383LC4
v05.0514
GaAs PHEMT MMIC MEDIUM
POWER AMPLIFIER, 12 - 30 GHz
Evaluation PCB
Item Description
J1, J2 2.92 mm PCB mount K-connector
J3, J4 DC Pin
C1 100 pF capacitor, 0402 pkg.
C2 1,000 pF Capacitor, 0603 pkg.
C3 2.2µF Capacitor, Tantalum
U1 HMC383LC4 Amplier
PCB
[2]
108535 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350.
List of Materials for Evaluation PCB 122198
[1]
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation board should be mounted to an appro-
priate heat sink. The evaluation circuit board shown
is available from Hittite upon request.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D

HMC383

Mfr. #:
Manufacturer:
Analog Devices / Hittite
Description:
RF Amplifier Medium pow amp Chip, 12 - 30 GHz
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union